Exploring High Voltage Potential of 3D Printed Capacitors: A Filament-Based Comparison Through Dielectric Performance Analysis
Open Access
- 19 December 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11894
Abstract
Recent advancements in 3D printing technology have enabled the rapid production of complex structures, yet the dielectric performance of 3D printing materials and their potential for manufacturing electrical components remain insufficiently studied. In this study, a capacitor rated at 10 kV with a capacitance of 1 nF was designed and developed for high-voltage applications. During the production of the capacitor, the insulating and conductive parts were fabricated using a 3D printer. While PLA, ABS, ASA, and PETG were employed as insulating materials, aluminum was chosen as the conductive part. Theoretical calculations and the finite element method were used to validate the measured capacitance of the equipment. The performance of the prototype capacitor was analyzed through partial discharge inception voltages (PDIV), dissipation factor (tanδ), and breakdown voltage measurements. Dissipation factor measurements were performed at 2 and 4 kV voltages in the 50–400 Hz frequency range. The performance of employed materials was comparatively analyzed through experimental and simulation results. Finally, the impact of different insulating materials on the dielectric performance of the prototype capacitors was evaluated.Keywords
Funding Information
- authors
This publication has 37 references indexed in Scilit:
- Material extrusion-based 3D printed capacitor optimization: Enhancing performance with ZnO and Cu-CNT reinforced ABS compositesApplied Materials Today, 2024
- A synthetic high-voltage power line insulator images datasetData in Brief, 2024
- Investigation of mechanical and printing properties of poly(lactic acid) and its composite filaments used in 3D printingIranian Polymer Journal, 2023
- Multi-material and parameter-controllable stereolithography 3D printing of graded permittivity composites for high voltage insulatorsVirtual and Physical Prototyping, 2023
- Insulation evaluation of MV underground cable with partial discharge and dielectric dissipation factor measurementsElectric Power Systems Research, 2023
- Preparation and characterization of organic–inorganic hybrid coatings for improving the insulation properties of electrical steelJournal of Coatings Technology and Research, 2023
- Prediction of dielectric parameters of an aged mv cable: A comparison of curve fitting, decision tree and artificial neural network methodsElectric Power Systems Research, 2022
- Characterization of 3D-printed capacitors created by fused filament fabrication using electrically-conductive filamentProcedia Manufacturing, 2019
- Analyses of the insulating characteristics of mineral oil at operating conditionsElectrical Engineering, 2017
- Bone tissue engineering using 3D printingMaterials Today, 2013