Hydroxyethylcellulose use simplifies mat manufacture and improves interfacial cohesion of alkaline-treated Pandanus utilis fibres in polyester composite
- 27 June 2020
- journal article
- research article
- Published by Taylor & Francis in Composite Interfaces
- Vol. 28 (4) , 429-443
Abstract
A simple method of bonding mutually perpendicular layers of alkaline-treated fibres, through the use of Hydroxyethylcellulose, has been studied as an alternative to woven fibre-mat. Following alkaline process optimisation by using the Taguchi DoE methodology, fibres treatment with 0.5% wt NaOH for 14 hours improved the tensile strength by 36% compared to the untreated fibres. Interfacial-Shear-Stress (measured by pull-out tests) was improved by 32% after the optimal alkaline-treatment. Furthermore, an improvement of 5% in Interfacial-Shear-Stress was achieved after a coating with 2 wt. % Hydroxyethylcellulose. Thus, Hydroxyethylcellulose increases the shear stress, and decreases friction without adverse impact on fibre strength.Keywords
This publication has 21 references indexed in Scilit:
- Physical, chemical, and surface properties of alkali-treated Indian hemp fibersComposite Interfaces, 2013
- Hydroxyethylcellulose surface treatment of natural fibres: the new ‘twist’ in yarn preparation and optimization for composites applicabilityJournal of Materials Science, 2011
- Characterisation Studies and Impact of Chemical Treatment on Mechanical Properties of Sisal FiberComposite Interfaces, 2011
- Sodium Borohydride as a Protective Agent for the Alkaline Treatment of Sisal Fibers for Polymer CompositesComposite Interfaces, 2011
- Effect of Palm Tree Fiber Orientation on Electrical Properties of Palm Tree Fiber-reinforced Polyester CompositesJournal of Composite Materials, 2009
- Influence of chemical treatments on the interfacial adhesion between sisal fibre and different biodegradable polymersComposite Interfaces, 2007
- Weibull analysis of microbond shear strength at sisal fibre–polyester resin interfacesComposite Interfaces, 2005
- Comparison of methods for the measurement of fibre/matrix adhesion in compositesComposites, 1992
- A Direct Comparison of the Fragmentation Test and the Microbond Pull-out Test for Determining the Interfacial Shear StrengthThe Journal of Adhesion, 1991
- Review of methods for characterization of interfacial fiber‐matrix interactionsPolymer Composites, 1988