The Theoretical Volumetric Displacement of a Check-Valve Type, Digital Displacement Pump
- 22 November 2018
- journal article
- research article
- Published by ASME International in Journal of Dynamic Systems, Measurement, and Control
- Vol. 141 (3)
Abstract
This paper has been written to develop closed-form equations for describing the theoretical displacement of a check-valve type, digital displacement pump. In theory, the digital displacement pump is used to alter the apparent volumetric displacement of the machine by short circuiting the flow path for reciprocating pistons within the machine that would ordinarily deliver a full volumetric flow rate to the discharge side of the pump. The short circuiting for the pistons is achieved by opening and closing a digital valve connected to each piston chamber at a desired time during the kinematic cycle for each reciprocating piston. Experience with these machines has shown that the expected volumetric displacement for the machine tends to decrease with pressure. This paper presents a theoretical explanation for the reduced volumetric displacement of the pump and quantifies the expected behavior based upon the digital valve command, the residual volume of fluid within a single piston chamber, and the fluid bulk modulus-of-elasticity. In summary, it shown that the apparent volumetric displacement of the machine may be reduced by as much as 10% for high-displacement commands and by as much as 30% for low-displacement commands.Keywords
This publication has 13 references indexed in Scilit:
- Mapping the Efficiency for a Hydrostatic TransmissionJournal of Dynamic Systems, Measurement, and Control, 2016
- Experimental Investigation of a Switched Inertance Hydraulic System With a High-Speed Rotary ValveJournal of Dynamic Systems, Measurement, and Control, 2015
- On the Dynamic Behavior of Check Valves for High Frequency Oscillation Pumps2013
- Study on a seawater hydraulic piston pump with check valves for underwater toolsProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2011
- Air Suction Characteristics of a Water Hydraulic Piston Pump With Check ValvesJournal of Fluids Engineering, 2011
- Physical Limitations for the Bandwidth Frequency of a Pressure Controlled, Axial-Piston PumpJournal of Dynamic Systems, Measurement, and Control, 2011
- Model Development and Experimental Analysis of a Virtually Variable Displacement Pump SystemInternational Journal of Fluid Power, 2009
- The role of resonance in elementary hydraulic switching controlProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2003
- Digital Control of Electrohydraulic Servo System Operated by Differential Pulse Width ModulationJSME International Journal. Ser. C, Dynamics, Control, Robotics, Design and Manufacturing, 1993
- Numerical Modelling of Reciprocating Pumps with Self-Acting ValvesProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 1991