Optimizing High-Power Performance of [001]-Oriented Pb(Mg1/3Nb2/3)-PbTiO3 Through Combined DC and AC Polarization Above Curie Temperature
Open Access
Abstract
Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals (PMN-PT SCs) are widely utilized in high-performance piezoelectric devices due to their exceptional piezoelectric properties. Among the various post-processing techniques for domain engineering in PMN-PT SCs, alternating current polarization (ACP) has become a widely adopted method for enhancing piezoelectric performance. This study proposes a new ultrahigh-temperature field-cooling polarization (UFCP) technique, combining direct current polarization (DCP) and ACP with field cooling above the Curie temperature. Dielectric spectra indicate that the UFCP method promotes electric field-induced phase transitions above the Curie point, forming a stable multiphase configuration. The transverse piezoelectric coefficient of UFCP SCs is , and the electromechanical coupling factor is 0.559. Compared with traditional DCP, UFCP increases by 68.6%, the mechanical quality factor by 16.7%, and the piezoelectric figure of merit (FOM) by 98.3%. Furthermore, under high-power excitation with a root-mean-square voltage of , UFCP achieves a 343% increase in power and a 130.5% improvement in the FOM compared with DCP, demonstrating its potential for enhancing high-power performance in practical applications.
Keywords
Funding Information
- National Natural Science Foundation of China (12104300, 2021YFA0716502)
- National Key R&D Program of China (12104300, 2021YFA0716502)
This publication has 42 references indexed in Scilit:
- Enhanced high-power behaviors of Mn-doped Pb (In1/2Nb1/2) O3-Pb(Mg1/3Nb2/3) O3-PbTiO3 piezoelectric crystals through combining direct and alternating current polarizationJournal of Alloys and Compounds, 2024
- Mesophase induced by alternating-current poling in relaxor ferroelectric single crystalsActa Materialia, 2024
- A Piezo‐Tribovoltaic Nanogenerator with Ultrahigh Output Power Density and Dynamic Sensory FunctionsAdvanced Energy Materials, 2023
- Ferroelectric Domain Wall Engineering Enables Thermal Modulation in PMN–PT Single CrystalsAdvanced Materials, 2023
- Characterization of high-power mechanical quality factor of piezoelectric ceramic discs under self-heating conditionJournal of Materials Research and Technology, 2023
- Spurious-mode vibrations caused by alternating current poling and their solution process for Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystalsJournal of Materiomics, 2022
- High piezoelectricity after field cooling AC poling in temperature stable ternary single crystals manufactured by continuous-feeding Bridgman methodJournal of Advanced Ceramics, 2021
- High temperature and low voltage AC poling for 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 piezoelectric single crystals manufactured by continuous-feeding Bridgman methodJournal of Materiomics, 2021
- Piezoelectric Energy Harvesting Design Principles for Materials and Structures: Material Figure‐of‐Merit and Self‐Resonance TuningAdvanced Materials, 2020
- Relaxor-based ferroelectric single crystals: Growth, domain engineering, characterization and applicationsProgress in Materials Science, 2014