XWXiaobo Wang

Xiaobo Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaobo Wang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrahigh‐temperature field cooling poling of PMN–PT single crystals for enhanced material and transducer performance

    by Yuliang Zhu, Xiaobo Wang, Junwen Deng, Xingyu Chen, Linzi Huang, Chengtao Luo, Tao Han

    Relaxor‐based ferroelectric single crystals, such as Pb(Mg 1/3 Nb 2/3 )O 3 –PbTiO 3 (PMN–PT), are critical for advanced ultrasonic transducers due to their exceptional piezoelectric and electromechanical properties. To further enhance performance, domain engineering has emerged as a cost‐effective and versatile strategy for tailoring material functionality. In this work, an ultrahigh‐temperature field cooling poling (UFCP) method is applied to [001]‐oriented PMN–PT single crystals. The approach combines DC–AC poling above the Curie temperature with a subsequent field cooling process, enabling controlled domain configuration and enhanced thickness‐mode vibration performance. Compared with conventional direct current poling (DCP), UFCP crystals exhibit a 51% increase in piezoelectric coefficient and a 23% improvement in the mechanical quality factor . Thickness‐mode ultrasonic transducers fabricated from these crystals further demonstrate a 7.2% enhancement in −6 dB bandwidth and a 2.3 dB reduction in insertion loss. These results establish UFCP as an effective domain engineering strategy that optimizes phase coexistence to achieve simultaneous improvements in material properties and device performance.


  • Open Access

    High-Sensitivity Air-Coupled Ultrasonic Transducer Design Based on PMN-PT Bending Vibration Modes

    by Junwen Deng, Xingyu Chen, Yuliang Zhu, Xiaobo Wang, Tao Han, Chengtao Luo

    Gas pipelines are a critical means of transportation in industrial production. To detect gas pipeline leaks, ultrasonic transducers with specific center frequencies and high sensitivity are required. This paper proposes a novel air-coupled ultrasonic transducer design based on a horn-type matching layer and a bending-mode type of piezoelectric material, specifically tailored for gas leak detection scenarios. The transducer design is optimized by the finite element method, focusing on the basic components of the piezoelectric bimorph, the horn and the supporting tube. First, the influence of various dimensional parameters of the piezoelectric bimorph on the bending vibration mode was analyzed. Then, the effects of the other two components, the horn and the supporting tube, on the piezoelectric bimorph vibration mode were investigated. A parametric scan on the dimensions of these components was conducted to optimize the transducer’s output. Finally, ultrasonic transducers using PMN-PT and PZT were fabricated and tested. The results show that the sensitivity of those transducers surpasses that of similar commercial transducers, especially the PMN-PT one with a center frequency of 40 kHz and a peak receiving sensitivity of −51.1 dB. This transducer, benefiting from the high-performance piezoelectric material and the bending vibration mode, proves to be a promising candidate for high-precision leak detection in gas pipelines.


  • Open Access

    Optimizing High-Power Performance of [001]-Oriented Pb(Mg1/3Nb2/3)-PbTiO3 Through Combined DC and AC Polarization Above Curie Temperature

    by Yuliang Zhu, Xiaobo Wang, Wenchao Xue, Xinran Wen, Chengtao Luo

    Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals (PMN-PT SCs) are widely utilized in high-performance piezoelectric devices due to their exceptional piezoelectric properties. Among the various post-processing techniques for domain engineering in PMN-PT SCs, alternating current polarization (ACP) has become a widely adopted method for enhancing piezoelectric performance. This study proposes a new ultrahigh-temperature field-cooling polarization (UFCP) technique, combining direct current polarization (DCP) and ACP with field cooling above the Curie temperature. Dielectric spectra indicate that the UFCP method promotes electric field-induced phase transitions above the Curie point, forming a stable multiphase configuration. The transverse piezoelectric coefficient d31 of UFCP SCs is 1126 pC/N, and the electromechanical coupling factor k31 is 0.559. Compared with traditional DCP, UFCP increases d31 by 68.6%, the mechanical quality factor Qm by 16.7%, and the piezoelectric figure of merit (FOM) by 98.3%. Furthermore, under high-power excitation with a root-mean-square voltage of 15 V, UFCP achieves a 343% increase in power and a 130.5% improvement in the FOM compared with DCP, demonstrating its potential for enhancing high-power performance in practical applications.


  • Open Access

    Studies on the High-Power Piezoelectric Property Measurement Methods and Decoupling the Power and Temperature Effects on PZT-5H

    by Wenchao Xue, Xiaobo Wang, Yuliang Zhu, Chengtao Luo

    For those piezoelectric materials that operate under high-power conditions, the piezoelectric and dielectric properties obtained under small signal conditions cannot be directly applied to high-power transducers. There are three mainstream high-power characterization methods: the constant voltage method, the constant current method, and the transient method. In this study, we developed and verified a combined impedance method that integrated the advantages of the constant voltage and current methods, along with an improved transient method, for high-power testing of PZT-5H piezoelectric ceramics. The results from both methods indicated that with increasing power, the electromechanical coupling coefficient k31 , the piezoelectric constant d31, and the elastic compliance s11E of the PZT-5H showed increasing trends, while the mechanical quality factor Qm first decayed rapidly and then stabilized at a fixed level. Additionally, under the combined impedance method, the temperature of the vibrators rose significantly due to self-heating, whereas the transient method generated almost no heat, and the vibrators remained at room temperature. By comparing the results from the two methods, we decoupled the effects of temperature and power on the high-power piezoelectric performance. The results showed that the self-heating temperature amplified the effects of power on k31, d31, and s11E, while its influence on Qm remained negligible.


  • Effect of PbTiO3 Content Variation on High-power Performance of PMN-PT Single Crystal

    by Xiaobo Wang, Yuliang Zhu, Wenchao Xue, Ruchuan Shi, Bofeng Luo, Chengtao Luo


  • Open Access

    A Piezoelectric–Piezoresistive Coupling Electric Field Sensor for Large Dynamic Range AC Electric Field Measurements

    by Xiaobo Wang, Bofeng Luo, Rongbo Zhang, Yang Song, Yaqian Zhao, Chengtao Luo

    We propose a piezoelectric–piezoresistive coupling electric field sensor capable of performing large dynamic range AC electric field measurements. The electric field sensor utilizes direct coupling between piezoelectric (PE) materials and piezoresistive (PR) strain gauges, in conjunction with an external signal conditioning circuit, to measure AC electric fields effectively. We verified the feasibility of the scheme using a finite element simulation, fabricated a prototype of the electric field sensor, and characterized the properties of the prototype. The testing results indicate that the sensor exhibits an ac resolution of 50 V/m and a linear measurable electric field range of 0 to over 200 kV/m, which keeps the linearity at less than 0.94% from 1 Hz to over 5 kHz. Furthermore, the sensor also has advantages, such as a small size and low power consumption. The sensor can enhance the comprehensive observability and measurability of digital power grids.