Mathematical Models of Grinding Forces in the Hob Cutter Sharpening Process
Open Access
Abstract
The article presents the results of research aimed at developing mathematical models for determining the components of grinding force occurring during the sharpening of the rake face of hob cutters. The development of the models was based on the results obtained during experimental tests conducted in the first stage of the research. The studies were carried out using a tool grinder and an aluminum oxide grinding wheel. During the tests, two components of the grinding force were measured, using a piezoelectric dynamometer. A sample made of HS6-5-2 high-speed steel was ground. Grinding was carried out using different sets of cutting parameters. Based on the obtained measurement results, two mathematical models were developed in the form of (1) a multiple regression function and (2) a polynomial function, enabling the calculation of the normal and the tangential force. The experimentally obtained results were then compared with those calculated based on the developed models, and the results of this comparison showed that the developed models provide a good basis for analyzing the sharpening process of hob cutters in terms of variable grinding parameters.Keywords
This publication has 20 references indexed in Scilit:
- Prediction and analysis of grinding force on grinding heads based on grain measurement statistics and single-grain grinding simulationThe International Journal of Advanced Manufacturing Technology, 2024
- Mechanical behavior and modeling of grinding force: A comparative analysisJournal of Manufacturing Processes, 2023
- Analytical grinding force prediction with random abrasive grains of grinding wheelsInternational Journal of Mechanical Sciences, 2023
- Modelling of grinding mechanics: A reviewChinese Journal of Aeronautics, 2022
- A grinding force prediction model with random distribution of abrasive grains: considering material removal and undeformed chipsThe International Journal of Advanced Manufacturing Technology, 2022
- Influence of the condition of the surface layer of a hob cutter sharpened using the MQL-CCA hybrid method of coolant provision on its operational wearThe International Journal of Advanced Manufacturing Technology, 2018
- Influence of application of hybrid MQL-CCA method of applying coolant during hob cutter sharpening on cutting blade surface conditionJournal of Cleaner Production, 2018
- Regenerative chatter in a plunge grinding process with workpiece imbalanceThe International Journal of Advanced Manufacturing Technology, 2016
- Regenerative chatter in self-interrupted plunge grindingMeccanica, 2016
- Non-linear analysis and quench control of chatter in plunge grindingInternational Journal of Non-Linear Mechanics, 2015