Formation mechanism of continuous gas leakage paths in cement sheath during hydraulic fracturing
Open Access
- 20 March 2020
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 8 (7) , 2527-2547
Abstract
Continuous gas leakage paths of cement sheath during hydraulic fracturing were investigated in this study. The finite‐element models of a casing–cement‐sheath–formation assembly for the whole wellbore were established, the integrity of the cement sheath of the whole wellbore during single‐stage fracturing was analyzed firstly, and the factors affecting the integrity were examined. Furthermore, a cyclic compression test was conducted. Then, test results for the accumulative plastic strain of the cement sheath under the intermediate casing shoe during multistage fracturing were analyzed. Finally, the mechanism of dilatancy of cement stone in cyclic compression tests was analyzed. The results show that the radial and tangential stresses of the cement sheath increase and decrease, respectively, with depth. The cement sheath above the intermediate casing shoe had a risk of tensile failure, which could result in tangential tensile cracks. The cement sheath below the intermediate casing shoes had cumulative plastic strain, resulting in a microannulus. Reducing Young's modulus, increasing the Poisson ratio of the cement sheath, and reducing the pump pressure were beneficial to relieve the stress state. When the cyclic compressive stress exceeded the dilatation yield stress, the permeability increased with cycle numbers, and the increase in permeability provided another leakage path for gas migration.Keywords
Funding Information
- National Natural Science Foundation of China (51674272, U1762211)
This publication has 26 references indexed in Scilit:
- Early-Age Stress and Pressure Developments in a Wellbore Cement Liner: Application to Eccentric GeometriesJournal of Applied Mechanics, 2016
- An analytical solution to simulate the effect of cement/formation stiffness on well integrity evaluation in carbon sequestration projectsJournal of Natural Gas Science and Engineering, 2015
- Simulating Multizone Fracturing in Vertical WellsJournal of Energy Resources Technology, 2014
- HPHT Cement Sheath Integrity Evaluation Method for Unconventional Wells2014
- Evaluation of the Potential for Gas and CO2 Leakage Along WellboresSPE Drilling & Completion, 2009
- Development of Leak Resistance in Industry Standard OCTG Connections using Finite Element Analysis and Full Scale Testing2001
- A Progressive Damage Model for Mechanically Fastened Joints in Composite LaminatesJournal of Composite Materials, 1999
- Computational modelling of impact damage in brittle materialsInternational Journal of Solids and Structures, 1996
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996
- A Single Technique Solves Gas Migration Problems Across a Wide Range of Conditions1988