CFD MODELING OF THE EFFECT OF ANTIFER UNITS USED IN THE ARMOR LAYER OF MOUND BREAKWATERS ON WAVE OVERTOPPING
Authors:
- Baris Ufuk SenturkBSBaris Ufuk Senturk
- Furkan DemirFDFurkan Demir
- Berkay ErlerBEBerkay Erler
- Alperen Mulayim KorkmazAKAlperen Mulayim Korkmaz
- Hasan Gokhan GulerHGHasan Gokhan Guler
- Cuneyt BaykalCBCuneyt Baykal
- Gulizar Ozyurt TarakciogluGTGulizar Ozyurt Tarakcioglu
- Dogan KisacikDKDogan Kisacik
- Isikhan GulerIGIsikhan Guler
- Ahmet Cevdet YalcinerAhmet Cevdet Yalciner
- Aysen ErginAEAysen Ergin
Open Access
- 29 May 2025
- journal article
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 85
Abstract
Accurate prediction of wave overtopping is crucial for designing mound breakwaters. It is a common practice to use empirical equations (e.g. EurOtop, 2018) to determine wave overtopping discharges for practical purposes. On the other hand, with the help of the exponential increase in computer technology, the use of computational fluid dynamics (CFD) tools for wave overtopping is becoming widespread (e.g. Chen et al., 2021). In coastal engineering CFD applications, it is a common practice to model the mound breakwaters using a macro porous media modeling approach, where the overall flow behavior through the porous media is mimicked (Guler, 2020). Volume-averaged Reynolds- averaged Navier–Stokes (VARANS) equations are an integral part of the macro porous media modeling approach. However, the appropriate application of VARANS equations strongly depends on the friction coefficients, especially when investigating the processes around the porous regions. These coefficients appear in the VARANS equations due to volume averaging based on the Darcy-Forchheimer Equation. Although Jensen et al. (2014) previously carried out an extensive study for the calibration of these friction coefficients under different conditions considering flow through rocks, the effects of different armor units, placement methods, and packing density have not been studied in the literature yet. This study delves into the calibration of friction coefficients within the VARANS equations for Antifer units used in the armor layer of mound breakwaters with different placement methods (closed pyramid, double pyramid, and irregular) and packing densities by comparing the results with the physical model experiments. Thus, this research aims to increase the accuracy of CFD assessments on wave overtopping, offering important opportunities for the design of coastal structures.Keywords
This publication has 5 references indexed in Scilit:
- Numerical modelling of wave overtopping at dikes using OpenFOAM®Coastal Engineering, 2021
- Performance of interFoam on the simulation of progressive wavesCoastal Engineering Journal, 2019
- Investigations on the porous media equations and resistance coefficients for coastal structuresCoastal Engineering, 2014
- Realistic wave generation and active wave absorption for Navier–Stokes modelsCoastal Engineering, 2013
- Three-dimensional interaction of waves and porous coastal structuresCoastal Engineering, 2012