IGIsikhan Guler

Isikhan Guler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Isikhan Guler has a total of 19 co-authors. Here are the top co-authors by number of shared publications:

  • Ahmet Cevdet Yalciner

    Department of Civil Engineering, Middle East Technical University, Ankara, Turkey

    7 shared publications
  • Hasan Gokhan Guler

    Gulizar Ozyurt Tarakcioglu Isikhan Guler Yalciner Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Izmir Institute of Technology Middle East Technical University Middle East Technical University Middle East Technical University

    7 shared publications
  • Aysen Ergin

    Gulizar Ozyurt Tarakcioglu Isikhan Guler Yalciner Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Izmir Institute of Technology Middle East Technical University Middle East Technical University Middle East Technical University

    6 shared publications
  • Cuneyt Baykal

    Gulizar Ozyurt Tarakcioglu Isikhan Guler Yalciner Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Izmir Institute of Technology Middle East Technical University Middle East Technical University Middle East Technical University

    6 shared publications
  • Gulizar Ozyurt Tarakcioglu

    Middle East Technical University

    6 shared publications
  • Alperen Mulayim Korkmaz

    Gulizar Ozyurt Tarakcioglu Isikhan Guler Yalciner Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Middle East Technical University Izmir Institute of Technology Middle East Technical University Middle East Technical University Middle East Technical University

    4 shared publications

Latest Publications

  • Open Access

    Impact of November 2023 Storms along the Southern Black Sea Coastline

    by Hasan Gokhan Guler, Gozde Guney Dogan, Isikhan Guler, Cagil Kirezci, Seyda Pirincci, Ahmet Cevdet Yalciner

    This study presents a comprehensive assessment of two successive storm events that impacted the Black Sea coasts in November 2023. Using a combination of meteorological and oceanographic datasets, satellite altimetry, and an extensive post-disaster field survey conducted at most of the affected regions along the Southern Black Sea coastline, the characteristics of storms and their impacts on coastal structures and communities are documented in detail. The storms, spaced just one week apart, generated significant wave heights exceeding 7–8 m offshore, wind speeds above 20–25 m/s, and widespread coastal inundation. Despite the limitations in the spatial resolution of global datasets, particularly in capturing localized wind and wave conditions, datasets provided valuable insights together with observational data. Field observations revealed recurring structural damages across the region, particularly the breakwater crown walls, due to high wave impact. At several harbors, displaced armor units contributed to damage. Inundation extends up to 270 m, highlighting the extreme wave run-up and overtopping during the storms. A digital repository containing photos and videos was also developed and openly shared via the Zenodo platform to support further research and documentation. This study contributes a unique and open-access dataset, empirical insights on structural damage mechanisms, and a baseline for improving future coastal hazard assessments in semi-enclosed seas such as the Black Sea.

  • Open Access

    CFD MODELING OF THE EFFECT OF ANTIFER UNITS USED IN THE ARMOR LAYER OF MOUND BREAKWATERS ON WAVE OVERTOPPING

    by Baris Ufuk Senturk, Furkan Demir, Berkay Erler, Alperen Mulayim Korkmaz, Hasan Gokhan Guler, Cuneyt Baykal, Gulizar Ozyurt Tarakcioglu, Dogan Kisacik, Isikhan Guler, Ahmet Cevdet Yalciner, et al.

    Accurate prediction of wave overtopping is crucial for designing mound breakwaters. It is a common practice to use empirical equations (e.g. EurOtop, 2018) to determine wave overtopping discharges for practical purposes. On the other hand, with the help of the exponential increase in computer technology, the use of computational fluid dynamics (CFD) tools for wave overtopping is becoming widespread (e.g. Chen et al., 2021). In coastal engineering CFD applications, it is a common practice to model the mound breakwaters using a macro porous media modeling approach, where the overall flow behavior through the porous media is mimicked (Guler, 2020). Volume-averaged Reynolds- averaged Navier–Stokes (VARANS) equations are an integral part of the macro porous media modeling approach. However, the appropriate application of VARANS equations strongly depends on the friction coefficients, especially when investigating the processes around the porous regions. These coefficients appear in the VARANS equations due to volume averaging based on the Darcy-Forchheimer Equation. Although Jensen et al. (2014) previously carried out an extensive study for the calibration of these friction coefficients under different conditions considering flow through rocks, the effects of different armor units, placement methods, and packing density have not been studied in the literature yet. This study delves into the calibration of friction coefficients within the VARANS equations for Antifer units used in the armor layer of mound breakwaters with different placement methods (closed pyramid, double pyramid, and irregular) and packing densities by comparing the results with the physical model experiments. Thus, this research aims to increase the accuracy of CFD assessments on wave overtopping, offering important opportunities for the design of coastal structures.

  • Open Access

    A CASE STUDY ON THE MAJOR DAMAGE AT A PORT: DAMAGE ASSESSMENT AND UPGRADE OF THE BREAKWATER

    by Hasan Gokhan Guler, Cagil Kirezci, Berkay Akyol, Gunay Gazaloglu, Emrecan Isik, Cuneyt Baykal, Gulizar Ozyurt Tarakcioglu, Jentsje van der Meer, Ahmet Cevdet Yalciner, Isikhan Guler, et al.

    In this study, the major damage at a commercial port located in the Southwestern Black Sea Region due to a severe storm on January 18-19, 2018 is investigated, and the experimental campaign carried out to test the performance of the upgraded breakwaters is summarized. First, the observations during the field survey that was conducted one week after the event are presented. Next, numerical wave modeling studies carried out to estimate the wave characteristics that caused the damage are described. After that, the potential reasons for the damage are discussed based on the observations from the field survey and the numerical modeling studies. Finally, the experiments focusing on the upgrade of both the trunk and head sections of the main breakwater of the port are summarized.

  • Open Access

    EFFECTS OF DIFFERENT UNITS AND PLACEMENT METHODS ON WAVE OVERTOPPING ON MOUND BREAKWATERS

    by Alperen Mulayim Korkmaz, Berkay Erler, Furkan Demir, Baris Ufuk Senturk, Hasan Gokhan Guler, Cuneyt Baykal, Gulizar Ozyurt Tarakcioglu, Dogan Kisacik, Isikhan Guler, Ahmet Cevdet Yalciner, et al.

    Most of the existing and widely used wave run-up and overtopping formulas reflect the effect of different units placed at the armor layers of mound breakwaters utilizing a roughness coefficient (f) specifically assigned for the unit type (see e.g. TAW, 2002; EurOtop, 2018). However, the effect of the different armor placement methods has not been fully addressed in these approaches. The purpose of the present study is to investigate the effects of different placement methods and packing densities of different armor units on wave overtopping. Within this scope, an experimental study was carried out using quarry rocks, tetrapod and Antifer units along the armor layer of conventional mound breakwater cross-sections having two different face slopes. In the experiments, both the mean overtopping discharges (q) and individual overtopping volumes (Vind) were measured. The experimental results are compared with the computations based on the most prevalent formulas in practice.

  • Open Access

    NUMERICAL AND EXPERIMENTAL INVESTIGATION OF WAVE LOADS ON MOUND BREAKWATER HEADS

    by Cem Sevindik, Baris Ufuk Senturk, Furkan Demir, Hasan Gokhan Guler, Cuneyt Baykal, Gulizar Ozyurt Tarakcioglu, Isıkhan Guler, Ahmet Cevdet Yalciner, Aysen Ergin

    The head section of the conventional mound breakwaters is more critical than the trunk section because of wave breaking and refraction induced “high cone-overflow velocities”, and reduction in neighboring unit support (CIRIA et al., 2007; USACE, 2011). Therefore, the utilization of heavier armor units for the head section part is a widely accepted practice. As given in the literature, the lee-side of the head section is exposed to more damage than the other parts of the head section. However, the relation between the damage that occurs at the lee-side and the physical processes has not been studied in detail yet. In the scope of this study, the wave-breaking induced loading on Antifer units at the lee-side of a mound breakwater head was investigated by conducting both physical model experiments and computational fluid dynamics (CFD) modeling studies.

  • Open Access

    EFFECTS OF DIFFERENT ARMOUR UNITS AND PLACEMENT METHODS ON WAVE LOADS ACTING ON CROWN WALLS

    by Furkan Demir, Alperen Mulayim Korkmaz, Berkay Erler, Baris Ufuk Senturk, Hasan Gokhan Guler, Cuneyt Baykal, Gulizar Ozyurt Tarakcioglu, Dogan Kisacik, Isikhan Guler, Ahmet Cevdet Yalciner, et al.

    Numerous previous experiments aimed to clarify and predict the detailed mechanism of wave forces on crown walls of mound breakwaters. However, a comprehensive study has not yet been conducted for cases involving different placement methods and packing densities of armour units. This study examines how various placement methods and packing densities of tetrapod and Antifer units, in combination with natural rocks in the armour layer design, influence the distribution of wave forces on the crown walls. Physical model tests were carried out using 1:1.5 and 1:2 face slopes, allowing for modifications to model units in the armour layer and a comparison of changes in wave-induced forces experienced by the crown wall. As a result of the study, the empirical coefficients of Pedersen (1996) formulae adjusted by Norgaard et al. (2013) for shallow water condition were modified for Antifer and tetrapod units.

  • Open Access

    HYDRAULIC TESTS ON A XBLOCPLUS ARMOURED COASTAL REVETMENT

    by Işıkhan Güler, Cem Sevindik, Alperen Mülayim Korkmaz., Alperen Turgut, Hasan Gökhan Güler, Cüneyt Baykal, Gülizar Özyurt Tarakcıoğlu, Ahmet Cevdet Yalçıner, Ayşen Ergin

    In this study, the hydraulic tests performed on a XBlocPlus® armoured coastal revetment structure to be constructed at the mid-western Black Sea coast of Turkey are presented. The revetment structure protects a reclaimed area next to a thermal power-plant. The tests include measurements regarding i) the stability of the armour layer, ii) mean and individual wave overtopping iii) wave loads on the crown wall, and iv) overtopping induced scour at the lee-side. The revetment structure has an approximate length of 1 km. The toe depth varies between -7 m to -17 m (mean sea level, MSL). The design high water level (HWL) corresponding to 100-yr return period is calculated as +0.95 m. The nearshore bottom slope is around 1:30. The design significant wave height and the peak period at the toe of the structure with a 100- yr return period are given as Hm0 = 8.53 m and Ts = 9.91 s at the deepest section of the structure. The volume of the blocks used in the armour layer of the revetment varies as 6 m3, 14 m3 and 18 m3 from the shallowest region to the deepest section. The study covers the experiments performed for the section with 18 m3 blocks and a toe depth of -17 m (MSL).