Compressive Behavior of Wood Contact with Mortar and Epoxy Resin Adhesives
Preprint
- 26 September 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
In recent years, researchers and engineers have developed a wide range of connection systems between wood and other materials, such as concrete and steel. However, the mechanical behavior of the surfaces where wood meets these materials is yet to be understood. In wood, low-stiffness areas called damage zones form near end grains, when compressed parallel to the grain. These low-stiffness areas may come in contact with various materials; therefore, understanding the behavior of the damage zones with various materials. This paper describes the results and analysis of experimental tests conducted on 130 specimens compressed parallel to the grain, to examine the compression behavior when the low-stiffness areas of glulam (Japanese cedar and Japanese larch) come in contact with mortar, epoxy adhesives, and steel. Compared with specimens joined with steels, the specimens joined with mortar had lower strength and stiffness, whereas those with epoxy structural adhesives had higher or almost equivalent strength and stiffness. Additionally, the specimens joined with mortar had the most significant strain in the damage zone, followed by those with steel loading plates and those with epoxy structural adhesives. These results suggest that using mortar as a contact material has a detrimental effect on the strength and stiffness of glulam. In contrast, the use of epoxy structural adhesives can improve the stiffness of glulam by mitigating the effects of the damage zone.Keywords
All Related Versions
This publication has 15 references indexed in Scilit:
- Repair and strengthening of timber cantilever beamsWood Material Science & Engineering, 2017
- The bearing strength capacity perpendicular to grain of norway spruce – Evaluation of three structural timber design modelsConstruction and Building Materials, 2016
- Repair and reinforcement of timber columns and shear walls – A reviewConstruction and Building Materials, 2015
- Compression failure mechanism in small scale timber specimensConstruction and Building Materials, 2014
- Evaluation of perforated steel plates as connection in glulam–concrete composite structuresConstruction and Building Materials, 2012
- Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grainConstruction and Building Materials, 2012
- Experimental behaviour of LVL–concrete composite floor beams at strength limit stateEngineering Structures, 2011
- Structural design for compression strength perpendicular to the grain of timber beamsConstruction and Building Materials, 2010
- Predictions of compressive strength and kink band orientation for wood speciesMechanics of Materials, 2010
- Derivation of the bearing strength perpendicular to the grain of locally loaded timber blocksEuropean Journal of Wood and Wood Products, 2008