Effect of Arcing Time on Voltage Distribution of Double-Break Vacuum Circuit Breaker During the Transient Recovery Voltage Rising Phase
- 24 March 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 49 (4) , 1357-1362
Abstract
Grading capacitors are required to balance the voltage distribution of the double-break vacuum circuit breaker. However, large grading capacitors increase the magnitude and duration of the reignition current. To reduce grading capacitors, a synthetic circuit with double vacuum breaks was set up to study the effects of arcing time on voltage distribution. The voltage distribution of the upper break decreases from 61% to 52% with arcing times of two breaks decreasing from 6.6 to 3.4 ms synchronously. The experimental results demonstrate that reducing the arcing times can balance the voltage distribution during the transient recovery voltage (TRV) rising phase. The unbalance of TRV distribution can be further improved by adopting appropriate arcing times in the two breaks with grading capacitors having a capacitance of 3000 pF.Keywords
Funding Information
- National Natural Science Foundation of China (51777025)
- Fundamental Research Funds for the Central Universities (DUT19ZD219)
This publication has 13 references indexed in Scilit:
- Experimental Investigation Into the Synergy of Vacuum Circuit Breaker With Double-BreakIEEE Transactions on Plasma Science, 2015
- Study on Static and Dynamic Voltage Distribution Characteristics and Voltage Sharing Design of a 126-kV Modular Triple-Break Vacuum Circuit BreakerIEEE Transactions on Plasma Science, 2015
- Study on transient recovery voltage distribution mechanism and grading capacitor of double-break vacuum circuit breaker2012
- Relationship Between the Voltage Distribution Ratio and the Post Arc Current in Double-Break Vacuum Circuit BreakersIEEE Transactions on Plasma Science, 2009
- Interruption characteristics of double-break vacuum circuit breakersIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Investigations on the series connection of two switching gaps in one tube in vacuumIEEE Transactions on Plasma Science, 2005
- Influence of grading capacitors on the breaking performance of a 24-kV vacuum breaker series designIEEE Transactions on Dielectrics and Electrical Insulation, 2003
- Post-arc currents of vacuum interrupters with axial magnetic field contacts under high current and voltage stress2002
- Vacuum interrupter model based on breaking testsIEEE Transactions on Plasma Science, 1999
- Influence of grading capacitors on the breaking capacity of two vacuum interrupters in seriesIEEE Transactions on Dielectrics and Electrical Insulation, 1999