Abstract
In recent years, with the development of high-voltage and high-power GaN radio frequency (RF) devices, the current collapse effect caused by the high electric field cannot be ignored. This work investigates the influence of RF stress on the current collapse effect of a commercial Si-based GaN RF device in an actual amplifier circuit. We propose a clamp circuit with an RF isolation unit that can rapidly detect the on-resistance (Ron) of the device. The measurement results show that the Ron of the device exhibits an obvious degradation under different RF output power (Pout) of the amplifier conditions. The TCAD simulation and experimental results indicated that the Ron degradation is related to the high drain voltage and negative gate voltage stress in the off state. These two factors cause a large number of ionized traps in the gate region, which leads to a positive threshold voltage shift and an increase in the channel series resistance of the device. However, when the amplifier operates under high Pout conditions, the Ron of the device is decreased as the Pout increases. The analysis results indicated that the suppression of the current collapse effect is mainly caused by the recovery of the threshold voltage. We consider that this phenomenon is caused by the high-positive gate voltage in the on state of the device, which leads to a significant decrease in the ionized trap concentration in the barrier layer.
Funding Information
  • Basic Research Program of Jiangsu Province (BK20244002)

This publication has 23 references indexed in Scilit: