Water Transport and PEFC Performance with Different Interface Structure between Micro-Porous Layer and Catalyst Layer
Open Access
- 27 January 2016
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 163 (5) , F359-F366
Abstract
For interfaces between micro-porous layers (MPL) and catalyst layers (CL) made by the gas diffusion electrode (GDE) method, a seamless interface without gaps, shows better performance than that of cells with an interface made by the decal transfer method. With the decal transfer method, the MPL is simply hot-pressed to the CL-membrane assembly. This study investigates the effect of interface structure on cell performance and water transport in the MPL. Water distribution in cross sections of multiple layers were observed by a freezing method, where the cell is cooled below freezing temperature in short time and the water was observed in ice form by Cryo-SEM. The results show that a membrane electrode assembly (MEA) using the GDE method improves cell performance at high current densities. Direct observations by the freezing method and cryo-SEM show that there is no water accumulation at the MPL/CL interface made by the GDE method, while water accumulates at the interface made by the decal method. Other observations show that the water amount inside the MPL increases similarly in the two types of MEA when lowering the temperature, and the difference between the two types of MEA was only the water amount in the interface.Keywords
This publication has 21 references indexed in Scilit:
- Deterministic contact mechanics model applied to electrode interfaces in polymer electrolyte fuel cells and interfacial water accumulationJournal of Power Sources, 2013
- A two-phase model for studying the role of microporous layer and catalyst layer interface on polymer electrolyte fuel cell performanceInternational Journal of Hydrogen Energy, 2013
- A computational model for assessing impact of interfacial morphology on polymer electrolyte fuel cell performanceJournal of Power Sources, 2010
- Characterization of interfacial morphology in polymer electrolyte fuel cells: Micro-porous layer and catalyst layer surfacesJournal of Power Sources, 2010
- Water management studies in PEM fuel cells, part III: Dynamic breakthrough and intermittent drainage characteristics from GDLs with and without MPLsInternational Journal of Hydrogen Energy, 2010
- Water Transport Mechanisms in PEMFC Gas Diffusion LayersJournal of the Electrochemical Society, 2010
- Characterization of Interfacial Structure in PEFCs: Water Storage and Contact Resistance ModelJournal of the Electrochemical Society, 2010
- On the role of the microporous layer in PEMFC operationElectrochemistry Communications, 2009
- Two-Phase Transport in Polymer Electrolyte Fuel Cells with Bilayer Cathode Gas Diffusion MediaJournal of the Electrochemical Society, 2005
- Effects of Microporous Layers in Polymer Electrolyte Fuel CellsJournal of the Electrochemical Society, 2005