Nondestructive Microstructural Characterization of Superduplex Stainless Steel by Double Loop Electrochemical Polarization Reactivation Portable Test
Open Access
- 23 October 2017
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (suppl 2) , 440-446
Abstract
Superduplex stainless steels (SDSS) are frequently employed in the petrochemical industries where is required high mechanical strength, toughness, and corrosion resistance. However, these properties can be affected by deleterious phases formation due thermomechanical processes applied in the field during pipes and vessels construction. This work propose the nondestructive microstructural characterization of deleterious phases precipitated in SDSS isothermally treated in 800 and 850ºC using portable double loop electrochemical polarization reactivation tests (DL-EPR). The results obtained in this nondestructive test are quite close to those obtained by conventional test, and can be correlated with the amount of deleterious phases precipitated. It can be concluded that the microstructural degradation of superduplex stainless steel can be evaluated by portable DL-EPR test with slow sweep rates, using a special cell and a proper electrolyte at room temperature.Keywords
This publication has 8 references indexed in Scilit:
- Influence of Deleterious Phases Precipitation in the Corrosion Resistance Measured by Double Loop Electrochemical Polarization Reactivation Test in Superduplex Stainless SteelMaterials Research, 2015
- UTILIZAÇÃO DO EQUIPAMENTO DE ENSAIO EPR-DL DE CAMPO NA DETECÇÃO DE FASE SIGMATecnologia em Metalurgia, Materiais e Mineração, 2014
- Practical aspects on the use of on-site Double Loop Electrochemical Potentiodynamic Reactivation Technique (DL-EPR) for Duplex Stainless SteelCorrosion Science, 2013
- Study of deleterious phase precipitation under continuous cooling of superduplex stainless steel UNS S32750Materials Science and Technology, 2012
- Modeling of deleterious phase precipitation during isothermal treatments in superduplex stainless steelJournal of Materials Science, 2010
- Influence of the grain size on deleterious phase precipitation in superduplex stainless steel UNS S32750Materials Characterization, 2009
- Effects of solution treatment and continuous cooling on σ-phase precipitation in a 2205 duplex stainless steelMaterials Science and Engineering: A, 2001
- Application of double loop electrochemical potentiodynamic reactivation test to austenitic and duplex stainless steelsMaterials Science and Engineering: A, 1997