Comparison of the Jitter Performance of different Photonic Sampling Techniques
Authors:
- 18 January 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (4) , 1360-1367
Abstract
The jitter performance of different photonic sampling techniques are investigated. Two basic sampling mechanisms are identified. Depending on analog-to-digital converter (ADC) architectures, the sampling instant is defined either by a time instant at the rising edge of the detected pulses or by their center of mass. A generalized noise model is introduced and used for performance analysis. It is shown that using the center of mass of optical pulses for the sampling process is about one order of magnitude more precise in time than using a time instant at the rising edge. But the incThe jitter performance of different photonic sampling techniques are investigated. Two basic sampling mechanisms are identified. Depending on analog-to-digital converter (ADC) architectures, the sampling instant is defined either by a time instant at the rising edge of the detected pulses or by their center of mass. A generalized noise model is introduced and used for performance analysis. It is shown that using the center of mass of optical pulses for the sampling process is about one order of magnitude more precise in time than using a time instant at the rising edge. But the increased timing precision of down to few fs is accompanied by a higher amplitude uncertainty decreasing the photonic ADC resolution to ≈ 9 effective number of bits.reased timing precision of down to few fs is accompanied by a higher amplitude uncertainty decreasing the photonic ADC resolution to ≈ 9 effective number of bits.Keywords
Funding Information
- German Federal Ministry of Education and Research
- framework of MOSAIC project (13N12435)
- German Research Foundation
- framework of the Sonderforschungsbereich SFB 787
This publication has 33 references indexed in Scilit:
- High bandwidth, high responsivity waveguide-coupled germanium p-i-n photodiodeOptics Express, 2015
- Jitter and skew measurements in optical clock distribution networks in silicon photonics2015
- BiCMOS Silicon Photonics Platform2015
- Broadband Noise Limit in the Photodetection of Ultralow Jitter Optical PulsesPhysical Review Letters, 2014
- The combined effect of process variations and power supply noise on clock skew and jitter2012
- A Semiconductor-Based 10-GHz Optical Comb Source With Sub 3-fs Shot-Noise-Limited Timing Jitter and $\sim$500-Hz Comb LinewidthIEEE Photonics Technology Letters, 2010
- Phase Noise and Jitter in CMOS Ring OscillatorsIEEE Journal of Solid-State Circuits, 2006
- Noise of mode-locked lasers (Part II): timing jitter and other fluctuationsApplied Physics B, 2004
- Quantum-enhanced positioning and clock synchronizationNature, 2001
- Clock distribution networks in synchronous digital integrated circuitsProceedings of the IEEE, 2001