Online Demodulation and Trigger for Flux-ramp Modulated SQUID Signals
Open Access
- 26 September 2022
- journal article
- research article
- Published by Springer Nature in Journal of Low Temperature Physics
- Vol. 209 (3-4) , 581-588
Abstract
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave SQUID multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID output signal before further processing. For cryogenic microcalorimeters, the signal contains events that are given by a fast exponentially rising and slowly exponentially decaying pulses shape. The events shall be detected by a trigger engine and recorded by a storage logic. Since the data rate can be decreased significantly by demodulation and event detection, it is desirable to do both steps on the deployed fast FPGA logic during measurement before passing the data to a general-purpose processor. In this contribution, we show the implementation of efficient multi-channel flux-ramp demodulation computed at run-time on a SoC-FPGA. Furthermore, a concept and implementation for an online trigger and buffer mechanism with its theoretical trigger loss rates depending on buffer size is presented. Both FPGA modules can be operated with up to 500 MHz clock frequency and can efficiently process 32 channels. Correct functionality and data reduction capability of the modules are demonstrated in measurements utilizing magnetic microcalorimeter irradiated with an Iron-55 source for event generation and read out by a microwave SQUID multiplexer.Keywords
All Related Versions
Funding Information
- Deutsche Forschungsgemeinschaft (EN29917-2)
- Karlsruher Institut für Technologie (KIT)
This publication has 9 references indexed in Scilit:
- Flux ramp modulation based MHz frequency-division dc-SQUID multiplexerApplied Physics Letters, 2021
- SDR-Based Readout Electronics for the ECHo ExperimentJournal of Low Temperature Physics, 2020
- Software-Defined Radio Readout System for the ECHo ExperimentIEEE Transactions on Nuclear Science, 2019
- A Scalable Readout for Microwave SQUID Multiplexing of Transition-Edge SensorsJournal of Low Temperature Physics, 2018
- Physics and Applications of Metallic Magnetic CalorimetersJournal of Low Temperature Physics, 2018
- Demonstration of a scalable frequency-domain readout of metallic magnetic calorimeters by means of a microwave SQUID multiplexerAIP Advances, 2017
- Flux-Ramp Modulation for SQUID MultiplexingJournal of Low Temperature Physics, 2012
- Demonstration of a multiplexer of dissipationless superconducting quantum interference devicesApplied Physics Letters, 2008
- Algorithms and architecture for the L1 calorimeter trigger at D0 run IIbIEEE Transactions on Nuclear Science, 2004