Experimental and Numerical Study on Air Flow Behavior for a Novel Retractable Reverse Circulation Drill Bit of Casing-while-Drilling (CwD)
Open Access
Abstract
A reverse circulation Down-The-Hole (DTH) hammer drill bit in Casing-while-Drilling (CwD) processes is designed and applied to drilling under complicated formation. The drill bit is a special retractable drill bit with an exclusive reverse circulation gas channel. Using numerical simulations and experiments, the influence of the gas channel structure parameters of the drill bit, including the inner jet nozzles, flushing nozzles, suction channel, and other parameters, on its reverse circulation performance is analyzed, and the optimal gas channel structure parameters of the drill bit are determined to improve the reverse circulation effect. The results show that the flushing nozzles and inner jet nozzles have an important influence on entrainment performance. The entrainment rate decreases as the flushing nozzle diameter increases and decreases as the inner jet nozzle diameter increases. An increase in the suction channel diameter can improve the reverse circulation effect of the drill bit. The spiral slot drill bit is more conducive to air being sucked into the central channel in the form of spiral flow, so it can improve the entrainment performance. The entrainment rate can reach 23.4% with the optimum structured drill bit.Keywords
Funding Information
- Natural Science Foundation of Jilin Province (YDZJ202101ZYTS143, 2018YFC1505303)
- National Key Research and Development Project of China (YDZJ202101ZYTS143, 2018YFC1505303)
This publication has 18 references indexed in Scilit:
- Orthogonal experimental research on the structural parameters of a novel drill bit used for ice core drilling with air reverse circulationJournal of Glaciology, 2019
- Design and numerical analysis of a large‐diameter air reverse circulation drill bit for reverse circulation down‐the‐hole air hammer drillingEnergy Science & Engineering, 2019
- Fluidic DTH hammer with backward-impact-damping design for hard rock drillingJournal of Petroleum Science and Engineering, 2018
- 3D finite elements modelling of percussive rock drilling: Estimation of rate of penetration based on multiple impact simulations with a commercial drill bitComputers and Geotechnics, 2018
- Influence of DTH Hammer Impact Energy on Drilling-with-Casing System PerformanceJournal of Mining Science, 2018
- Optimal Design of Novel Drill Bit to Control Dust in Down-the-Hole Hammer Reverse Circulation DrillingArabian Journal for Science and Engineering, 2017
- Development of a specially designed drill bit for down-the-hole air hammer to reduce dust production in the drilling processJournal of Cleaner Production, 2016
- Numerical Investigation Based on Orthogonal Design of Structural Parameters on Large-Diameter DTH Hammer BitAdvanced Materials Research, 2013
- Numerical Simulation on Bottom Hole Flow Fields of Reverse Circulation BitApplied Mechanics and Materials, 2012
- Modeling impact in down-the-hole rock drillingInternational Journal of Rock Mechanics and Mining Sciences, 2000