Countercurrent Flow Limitation in Slightly Inclined Pipes With Elbows
- 3 September 2015
- journal article
- Published by ASME International in Journal of Nuclear Engineering and Radiation Science
- Vol. 1 (4) , 041009
Abstract
One-dimensional (1D) sensitivity computations were carried out for air–water countercurrent flows in a -scale model of the hot leg and a -scale model of the pressurizer surge line in a pressurized water reactor (PWR) to generalize the prediction method for countercurrent flow limitation (CCFL) characteristics in slightly inclined pipes with elbows. In the 1D model, the wall friction coefficient of single-phase gas flows was used. The interfacial drag coefficient of , an appropriate adjustment factor of for the wall friction coefficient of single-phase liquid flows ( for of single-phase gas flows), and an appropriate adjustment factor of for the pressure loss coefficient of elbows in single-phase flows were determined to give good agreement between the computed and measured CCFL characteristics. The adjusted factors were used to compute and then discuss effects of the inclination angle and diameter on CCFL characteristics.
Keywords
This publication has 10 references indexed in Scilit:
- Experimental investigation of countercurrent flow limitation (CCFL) in a large-diameter hot-leg geometry: A detailed description of CCFL mechanisms, flow patterns and high-quality HSC imaging of the interfacial structure in a 1/3.9 scale of PWR geometryNuclear Engineering and Design, 2014
- Effects of Shape and Size on Countercurrent Flow Limitation in Flow Channels Simulating a PWR Hot LegNuclear Technology, 2014
- Correlation for countercurrent flow limitation in a PWR hot legJournal of Nuclear Science and Technology, 2012
- A review of CCFL phenomenonAnnals of Nuclear Energy, 2011
- Numerical simulation using CFD software of countercurrent gas–liquid flow in a PWR hot leg under reflux condensationNuclear Engineering and Design, 2011
- Countercurrent Gas-Liquid Flow in a PWR Hot Leg under Reflux Cooling (I) Air-Water Tests for 1/15-Scale Model of a PWR Hot LegJournal of Nuclear Science and Technology, 2010
- Flooding in the pressurizer surge line of AP600 plant and analyses of APEX dataNuclear Engineering and Design, 1999
- CCFL in hot legs and steam generators and its prediction with the CATHARE code1995
- Scale effects on countercurrent gas-liquid flow in a horizontal tube connected to an inclined riserNuclear Engineering and Design, 1988
- A model for predicting flow regime transitions in horizontal and near horizontal gas‐liquid flowAIChE Journal, 1976