Abstract
Strain response of FBG sensors are investigated at various temperatures from 298 K to 4.2 K. Numerical modelling is carried out for acrylate coated, substrate-free fiber Bragg grating (FBG) sensors at room temperature of 298 K and cryogenic temperatures of 77 K, 10 K and 4.2 K. A 1550 nm Bragg wavelength (λB) FBG sensor is modelled and simulated for applied strain (ε) ranging from 0 to 800 µm/m. The Bragg wavelength shifts (ΔλB) thus obtained are compared with the experimentally investigated values obtained by subjecting the FBG sensor to axial strain, with its sensing part not being bonded to any surface. The MTS25 tensile machine with a cryostat under vacuum conditions (10-4 mbar pressure) is used for the experiments and the required temperatures are maintained using liquid Nitrogen (LN2) and compressed Helium gas (He). The Bragg wavelength shift (ΔλB) versus induced strain (ε) is regressed with a linear polynomial function and the strain sensitivity obtained in both the cases are discussed.

This publication has 15 references indexed in Scilit: