Highly selective GaAs/AlGaAs dry etching using HBr/SF6/He
- 4 August 2021
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 39 (5) , 052202
Abstract
Selective etching of GaAs is critical for many applications, including flat optical components and high electron mobility transistors. It is long-known that F-containing process gases produce a nonvolatile AlFx layer on AlGaAs. In this work, we present a selective GaAs etch using an inductively coupled plasma with an HBr/SF6/He etch chemistry. The optimized process exhibits >1μm/min etch rates, >200:1 GaAs:AlGaAs selectivity, >50:1 GaAs:photoresist selectivity, sub-nm surface roughness, and minimal undercut. The effect of aspect ratio is investigated, revealing limitations for deposition of an Si-rich passivation layer. Moreover, selectivity dramatically increases with an AlGaAs etch stop with high (90%) Al content. By characterizing an HBr-based selective GaAs etch, this work provides a possible alternative to the better established chlorine-based selective processes.Keywords
This publication has 29 references indexed in Scilit:
- Highly controllable ICP etching of GaAs based materials for grating fabricationJournal of Semiconductors, 2012
- Extremely high aspect ratio GaAs and GaAs/AlGaAs nanowaveguides fabricated using chlorine ICP etching with N2-promoted passivationNanotechnology, 2010
- Anisotropic and Smooth Inductively Coupled Plasma Etching of III-V Laser Waveguides Using HBr-O[sub 2] ChemistryJournal of the Electrochemical Society, 2008
- A surface-emitting laser incorporating a high-index-contrast subwavelength gratingNature Photonics, 2007
- GaAs Etch Rate Enhancement with SF[sub 6] Addition to BCl[sub 3] PlasmasJournal of the Electrochemical Society, 2000
- Selective dry etching using inductively coupled plasmasApplied Surface Science, 1999
- Low‐Pressure Etching of Nanostructures and Via Holes Using an Inductively Coupled Plasma SystemJournal of the Electrochemical Society, 1999
- New chemistry for selective reactive ion etching of InGaAs and InP over InAlAs in SiCl4/SiF4/HBr plasmasApplied Physics Letters, 1995
- Temperature-dependent dry etching characteristics of III?V semiconductors in HBr- and HI-based dischargesPlasma Chemistry and Plasma Processing, 1994
- The Temperature Dependence of the Etch Rates of GaAs , AlGaAs , InP , and Masking Materials in a Boron Trichloride:Chlorine PlasmaJournal of the Electrochemical Society, 1988