MBMichael Barrow

Michael Barrow

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Michael Barrow has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A method for efficient, rapid, and minimally invasive implantation of individual non-functional motes with penetrating subcellular-diameter carbon fiber electrodes into rat cortex

    by Joseph G. Letner, Jordan L. W. Lam, Miranda G. Copenhaver, Michael Barrow, Paras R. Patel, Julianna M. Richie, Jungho Lee, Hun-Seok Kim, Dawen Cai, James D. Weiland, et al.

    Objective: Distributed arrays of wireless neural interfacing chips with 1-2 channels each, known as “neural dust”, could enhance brain machine interfaces (BMIs) by removing the wired connection through the scalp and increasing biocompatibility with their submillimeter size. Although several approaches for neural dust have emerged, a procedure for implanting them in batches that builds upon the safety and performance of currently used electrodes remains to be demonstrated. Approach: Here, we demonstrate the feasibility of implanting batches of wireless motes that rest on the cortical surface with carbon fiber electrodes of subcellular diameter (6.8-8.4 µm) that penetrate to a target brain depth of 1 mm without insertion aids. To simulate their implantation, we assembled more than 230 mechanically equivalent motes and affixed them to insertion tools with polyethylene glycol (PEG), a quickly dissolvable and biocompatible material. Then, we implanted mote grids of multiple configurations into rat cortex in vivo and evaluated insertion success and their arrangement on the brain surface using photos and videos captured during their implantation. Main Results: When placing motes onto the insertion device, we found that they aggregated in molten PEG such that the array pitch was only 5% wider than the dimensions of the mote bases themselves (240 x 240 µm). Overall, we found that motes with this arrangement could be inserted into rat cortex with a high success rate, as 171/186 (92%) motes in 4x4 (N=4) and 5x5 (N=5) square grid configurations were successfully inserted using the insertion device alone. After implantation, measurements of how much motes tilted (22±9°, X̄±S) and had been displaced relative to their original positions were smaller than those measured for devices implanted inside the brain in the literature. Significance: Collectively, these data establish the viability of safely implementing motes with ultrasmall electrodes and epicortically-situated chips for use in future BMIs.


  • Thermo-optic characterization of SU-8 at cryogenic temperature

    by Trisha Chakraborty, Oscar A. Jimenez Gordillo, Michael Barrow, Alan R. Kramer, Michal Lipson, Thomas E. Murphy, Karen E. Grutter

    We measured the optical transmission through an SU-8 microring resonator inside a cryostat and analyzed the shift of the resonant wavelengths to determine the thermo-optic behavior around a wavelength of 1600 nm. As the temperature was decreased from room temperature (RT) to 3K, the refractive index of crosslinked SU-8 was measured to increase from 1.571 to 1.584, while the thermo-optic coefficient decreased by two orders of magnitude.


  • A Light-Tolerant Wireless Neural Recording IC for Motor Prediction With Near-Infrared-Based Power and Data Telemetry

    by Jongyup Lim, Jungho Lee, Eunseong Moon, Michael Barrow, Gabriele Atzeni, Joseph G. Letner, Joseph T. Costello, Samuel R. Nason, Paras R. Patel, Yi Sun, et al.

    Miniaturized and wireless near-infrared (NIR)-based neural recorders with optical powering and data telemetry have been introduced as a promising approach for safe long-term monitoring with the smallest physical dimension among state-of-the-art standalone recorders. However, the main challenge for the NIR-based neural recording integrated circuits (ICs) is to maintain robust operation in the presence of light-induced parasitic short-circuit current from junction diodes. This is especially true when the signal currents are kept small to reduce power consumption. In this work, we present a light-tolerant and low-power neural recording IC for motor prediction that can fully function in up to 300 $\mu \text{W}$ /mm 2 of light exposure. It achieves the best-in-class power consumption of 0.57 $\mu \text{W}$ at 38 °C with a 4.1 noise efficiency factor (NEF) pseudo-resistor-less amplifier, an on- chip neural feature extractor, and individual mote-level gain control. Applying the 20-channel pre-recorded neural signals of a monkey, the IC predicts finger position and velocity with a correlation coefficient up to 0.870 and 0.569, respectively, with individual mote-level gain control enabled. In addition, wireless measurement is demonstrated through optical power and data telemetry using a custom photovoltaic (PV)/light-emitting diode (LED) GaAs chip wire bonded to the proposed IC.


  • Thermo-Optic Characterization of SU-8 at Cryogenic Temperature

    by Trisha Chakraborty, Oscar A. Jimenez Gordillo, Michael Barrow, Michal Lipson, Thomas E. Murphy, Karen E. Grutter

    We report for the first time the thermo-optic behavior of SU-8 around 1550nm in a ring resonator from 300K to 3K. Cryogenic measurement is enabled by on-chip 3D polymer structures that secure the fiber-to-chip coupling.

  • Highly selective GaAs/AlGaAs dry etching using HBr/SF6/He

    by Michael Barrow, Shawn Wright, Sarah Puzycki, Piyush Shah, Robert Bedford, Yuanchang Zhang, Jamie Phillips

    Selective etching of GaAs is critical for many applications, including flat optical components and high electron mobility transistors. It is long-known that F-containing process gases produce a nonvolatile AlFx layer on AlGaAs. In this work, we present a selective GaAs etch using an inductively coupled plasma with an HBr/SF6/He etch chemistry. The optimized process exhibits >1μm/min etch rates, >200:1 GaAs:AlGaAs selectivity, >50:1 GaAs:photoresist selectivity, sub-nm surface roughness, and minimal undercut. The effect of aspect ratio is investigated, revealing limitations for deposition of an Si-rich passivation layer. Moreover, selectivity dramatically increases with an AlGaAs etch stop with high (90%) Al content. By characterizing an HBr-based selective GaAs etch, this work provides a possible alternative to the better established chlorine-based selective processes.


  • Mid-wave infrared transmittance filters in suspended GaAs subwavelength gratings

    by Michael Barrow, Jamie Phillips

    The high-Q resonances observed in subwavelength gratings support many applications, including optical phase arrays, refractive index sensing, enhancement of nonlinear effects, and spectral filtering. Integrating these functions with active devices opens new possibilities for microscale optical systems. GaAs high-contrast gratings (HCGs) simplify the integration of resonant structures with active III–V semiconductor devices. These structures are particularly useful in the mid-wave infrared (5–7 μm), overcoming several limitations of the material systems presented in previous works. By selectively removing an underlying AlGaAs layer, a high index contrast is introduced between suspended GaAs gratings and air without using an exotic low-index substrate. Furthermore, epitaxial growth enables precise device thickness. In this work, we demonstrate GaAs/air HCG transmittance filters for operation in the mid-wave infrared. A numerical study investigates the dependence of filter performance on substrate proximity. We fabricate experimental filters using an HBr-based plasma etch and a selective wet etch. Optical characterization demonstrates quality factors >50 and transmittance peak efficiency >50%. The observed filter performance is comparable to other mid-wave infrared subwavelength grating filters. This work concludes with discussion of experimental nonidealities, emphasizing the considerable influence of grating size and optical measurement conditions. The suspended GaAs HCG filters show potential for direct integration with active devices such as photodetectors and lasers.


  • Open Access

    Ember - energy management of batteryless event detection sensors with deep reinforcement learning

    by Francesco Fraternali, Bharathan Balaji, Michael Barrow, Dezhi Hong, Rajesh K. Gupta

    Batteryless sensors avoid battery replacement at the cost of slowing down or stopping their operations when there is not sufficient energy to harvest in the environment. While this strategy can work for some applications, event-based applications still remain a challenge as events arrive sporadically and energy availability is uncertain. One solution is to only turn On a sensor right before an event is happening to both detect the event and save as much energy as possible. Therefore, the system has to correctly predict events while managing limited resource availability. In this demo, we present Ember, an energy management system based on deep reinforcement learning to duty cycle event-driven sensors in low-energy conditions. We show how our system learns environmental patterns over time and makes decisions to maximize the event detection rate for batteryless energy-harvesting sensor nodes subject to low energy availability. Furthermore, we show a novel self-supervised data collection algorithm that helps Ember in discovering new environmental patterns over time. For more details, we refer readers to the full paper of Ember [2].


  • Dual-Junction GaAs Photovoltaics for Low Irradiance Wireless Power Transfer in Submillimeter-Scale Sensor Nodes

    by Eunseong Moon, Michael Barrow, Jongyup Lim, David Blaauw, Jamie D. Phillips

    Dual-junction GaAs photovoltaic (PV) cells and modules at submillimeter scale are demonstrated for efficient wireless power transfer for Internet of Things and bio-implantable applications under low-flux illumination. The dual-junction approach meets demanding requirements for these applications by increasing the output voltage per cell with reduced area losses from isolation and interconnects. A single PV cell (150 μm × 150 μm) based on the dual-junction design demonstrates power conversion efficiency above 22% with greater than 1.2 V output voltage under low-flux 850 nm near-infrared LED illumination at 6.62 μW/mm 2 , which is sufficient for the batteryless operation of miniaturized CMOS IC chips. The output voltage of dual-junction PV modules with four series-connected cells demonstrates greater than 5 V for direct battery charging while maintaining a module power conversion efficiency of more than 23%.


  • Polarization-independent narrowband transmittance filters via symmetry-protected modes in high contrast gratings

    by Michael Barrow, Jamie Phillips

    We present a high-index contrast dielectric grating design for polarization-independent narrowband transmission filtering. A reduced symmetry hexagonal lattice allows coupling to symmetry-protected modes (bound states in the continuum) at normal incidence, enabling high-Q spectral peaks. The peak linewidth is tunable via degree of geometric symmetry reduction. Using diffraction efficiency calculations, we gain further insight into the design and physics of one-dimensional (1D) and two-dimensional (2D) asymmetric high contrast gratings. The grating design provides a filter response that is simultaneously polarization independent and functional at normal incidence, overcoming limitations of 1D asymmetric gratings and 2D symmetric gratings.


  • Influence of Finite Grating Size on Guided Mode Resonance Transmission Filters

    by Martin Scherr, Michael Barrow, Jamie Phillips

    Guided-mode resonant filters based on subwavelength dielectric gratings offer an effective means for narrowband transmission filters. The grating's lateral extent strongly influences the Bloch wave character of the guided mode and Fano resonance behavior responsible for narrowband transmittance. This are studied in this work for an asymmetric zero-contrast grating. Two mitigation techniques are proposed: reflectors surrounding the grating, and alternate geometries with increased guided-mode coupling.