Seismic Performance of Precast Concrete Rocking Walls Post-Tensioned with Distributed 600 MPa Steel Bars
Authors:
- Tae-Sung EomTETae-Sung Eom
- Seung-Jae LeeSLSeung-Jae Lee
- Hui Do KimHKHui Do Kim
- Su-Min KangSKSu-Min Kang
- Seung-Il KimSKSeung-Il Kim
Preprint
- 23 June 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
In this study, the seismic and self-centering behavior of unbonded post-tensioned precast concrete rocking walls (PT walls) under cyclic lateral loading was investigated. Unlike conventional PT walls utilizing high-strength strands concentrated near the center of the wall section, this system utilizes ordinary 600 MPa grade steel bars distributed across the wall section to improve constructability and cost-efficiency, targeting applications in low- to medium-rise buildings. Three isolated and two coupled wall specimens were tested under cyclic loading. The tests revealed that the hysteretic behavior of the isolated walls exhibited pronounced pinching and near-zero energy dissipation, marking a distinct departure from the typical self-centering behavior of conventional PT walls; despite localized concrete crushing and cover spalling at the wall toes in the early loading stages, the structural integrity remained stable up to a drift ratio of 6%, with minimal strength degradation. In contrast, the coupled wall specimens exhibited cyclic responses resembling the typical self-centering behavior. However, since damage continuously accumulated in the coupling beams from the early loading stages, subsequent post-yield strength degradation became rapid and significant, ultimately reducing the overall deformation capacity. A rocking model incorporating structural compatibility constraints was proposed to calculate the strength and deformation at the first yield and ultimate states, while accounting for the pinching observed in the post-yield cyclic behavior.Keywords
This publication has 7 references indexed in Scilit:
- Behavior of Precast Concrete Shear Walls for Seismic Regions: Comparison of Hybrid and Emulative SpecimensJournal of Structural Engineering, 2013
- Design and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic RegionsJournal of Structural Engineering, 2011
- Experimental and Analytical Lateral Load Response of Unbonded Post-Tensioned Precast Concrete Walls2004
- Hybrid Post-Tensioned Precast Concrete Walls for Use in Seismic RegionsPCI Journal, 2002
- Seismic Behavior and Design of Unbonded Post-Tensioned Precast Concrete WallsPCI Journal, 1999
- Seismic Design of Reinforced Concrete and Masonry Buildings1992
- Theoretical Stress‐Strain Model for Confined ConcreteJournal of Structural Engineering, 1988