Viscosity, Morphology, and Thermomechanical Performance of Attapulgite-Reinforced Bio-Based Polyurethane Asphalt Composites
Open Access
Abstract
Bio-based polyurethane asphalt binder (PUAB) derived from castor oil (CO) is environmentally friendly and exhibits extended allowable construction time. However, CO imparts inherently poor mechanical performance to bio-based PUAB. To address this limitation, attapulgite (ATT) with fibrous nanostructures was incorporated. The effects of ATT on bio-based PUAB were systematically investigated, including cure kinetics, rotational viscosity (RV) evolution, phase-separation microstructures, dynamic mechanical properties, thermal stability, and mechanical performance. Experimental characterization employed Fourier transform infrared spectroscopy, Brookfield viscometry, laser scanning confocal microscopy, dynamic mechanical analysis, thermogravimetry, and tensile testing. ATT incorporation accelerated the polyaddition reaction conversion between isocyanate groups in polyurethane (PU) and hydroxyl groups in ATT. Paradoxically, it reduced RV during curing, prolonging allowable construction time proportionally with clay content. Additionally, ATT’s compatibilizing effect decreased bitumen particle size in PUAB, with scaling proportionally with clay loading. While enhancing thermal stability, ATT lowered the glass transition temperature and damping properties. Crucially, 1 wt% ATT increased tensile strength by 71% and toughness by 62%, while maintaining high elongation at break (>400%). The cost-effectiveness and significant reinforcement capability of ATT make it a promising candidate for producing high-performance bio-based PUAB composites.Keywords
This publication has 59 references indexed in Scilit:
- Acrylate composite polyurethane binder for steel bridge deck pavements: Process optimization by response surface methodology and microanalysisJournal of Applied Polymer Science, 2024
- Bioderived thermosetting polymers and their nanocomposites: current trends and future outlookEmergent Materials, 2022
- Rational design of sustainable polyurethanes from castor oil: towards simultaneous reinforcement and tougheningScience China Materials, 2018
- Thermal, mechanical properties, and low‐temperature performance of fibrous nanoclay‐reinforced epoxy asphalt composites and their concretesJournal of Applied Polymer Science, 2014
- Synthesis and characterization of soy polyol-based polyurethane nanocomposites reinforced with silylated palygorskiteApplied Clay Science, 2014
- Polyurethanes: Versatile Materials and Sustainable Problem Solvers for Today’s ChallengesAngewandte Chemie International Edition, 2013
- Isocyanate-functionalized castor oil as a novel bitumen modifierChemical Engineering Science, 2013
- Polyurethane–attapulgite porous material: Preparation, characterization, and application for dye adsorptionJournal of Applied Polymer Science, 2012
- Polyurethanes Based on Castor Oil: Kinetics, Chemical, Mechanical and Thermal PropertiesMacromolecular Materials and Engineering, 2008
- FTIR spectroscopic study of palygorskite: Influence of the composition of the octahedral sheetApplied Clay Science, 2006