Indirect Restoration Thickness and Time after Light-Activation Effects on Degree of Conversion of Resin Cement
Open Access
- 1 August 2015
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Brazilian Dental Journal
- Vol. 26 (4) , 363-367
Abstract
This study evaluated the effects of indirect restorative materials, curing conditions and time on the degree of conversion (DC) of a dual-cured resin cement using infrared spectroscopy. The resin cement (RelyX Unicem 2, 3M ESPE) was applied to the diamond surface of a horizontal attenuated-total-reflectance unit and activated using one of following conditions: self-cure, direct light exposure, light exposure through indirect restorative materials (resin nano-ceramic: Lava Ultimate, 3M ESPE or feldspathic ceramic: Vita Blocks Mark II, Vita Zahnfabrik). Four thicknesses (0.5, 1.0, 1.5 or 2.0 mm) of each indirect material were analyzed, and the light-activation was performed using a blue LED light. Data (n=5) were analyzed by three-way ANOVA, Tukey's post hoc and Dunnett's tests (α=5%). No significant differences in DC were observed between indirect materials of similar thickness. All groups exhibited higher DC after 10 min than after 5 min. At both times points, the self-cure group exhibited significantly lower DC than all the light exposure groups. Only when the overlying indirect restoration had a thickness of 2 mm did DC decrease significantly. The presence of a thick, indirect restoration can decrease the DC of resin cement. DC after 10 min was higher than after 5 min. The self-cure mode yielded lower DC than the light-activating one.Keywords
This publication has 21 references indexed in Scilit:
- Efficiency of Dual-Cured Resin Cement Polymerization Induced by High-Intensity LED Curing Units Through Ceramic MaterialOperative Dentistry, 2015
- Resin-composite Blocks for Dental CAD/CAM ApplicationsJournal of Dental Research, 2014
- Microhardness of light- and dual-polymerizable luting resins polymerized through 7.5-mm-thick endocrownsThe Journal of Prosthetic Dentistry, 2014
- Effect of Simulated Tooth Temperature on the Degree of Conversion of Self-adhesive Resin Cements Exposed to Different Curing ConditionsOperative Dentistry, 2014
- The Effect of Ceramic Restoration Shade and Thickness on the Polymerization of Light- and Dual-cure Resin CementsOperative Dentistry, 2011
- Effect of thickness of indirect restoration and distance from the light-curing unit tip on the hardness of a dual-cured resin cement.Brazilian Dental Journal, 2010
- Effect of sodium sulfinate salts on the polymerization characteristics of dual-cured resin cement systems exposed to attenuated light-activationJournal of Dentistry, 2009
- Effect of curing mode on the polymerization characteristics of dual-cured resin cement systemsJournal of Dentistry, 2008
- The Effect of the Presence and Presentation Mode of Co-Initiators on the Microtensile Bond Strength of Dual-Cured Adhesive Systems Used in Indirect RestorationsOperative Dentistry, 2008
- Microtensile bond strength of dual-polymerizing cementing systems to dentin using different polymerizing modesThe Journal of Prosthetic Dentistry, 2007