Comparative Investigation on Wear Properties of Composite Coatings with Varying CeO2 Contents
Open Access
Abstract
Several innovative mixed powders of Ti6Al4V and NiCr-Cr3C2 with different CeO2 contents (0, 1, 2, 3, and 4 wt.%) were designed, and Ti2C-reinforced CrTi4-based composite coatings were prepared on the Ti6Al4V surface via laser cladding technology. The effects of CeO2 amount on the forming quality, microstructure, hardness, and wear resistance of the composite coatings were studied. The results showed that the CeO2 amount had a significant influence on the forming quality of the composite coatings. The cracks were eliminated completely when the CeO2 content was 2 wt.%; furthermore, the lowest porosity was obtained with the addition of 3 wt.% CeO2. The primary phase constituents of the coatings were non-stoichiometric Ti2C and a β-type solid solution (CrTi4) as the reinforcement and matrix, respectively. CeO2 and a low quantity of Ce2O3 were re-precipitated at the Ti2C/CrTi4 interface and CrTi4 grain boundary in the coatings with CeO2 addition. In addition, the average hardness of the composite coatings was 1.28–1.34 times higher than that of the Ti6Al4V substrate. The wear resistance of the composite coatings was significantly higher than that of the substrate. However, both the composite coatings and the Ti6Al4V substrate exhibited a mixed-wear mode, i.e., abrasive and adhesive wear.Keywords
Funding Information
- Chinese Aeronautical Establishment (2020Z049067002, 2020KJ020, 51905536, 2021YJS038)
- Scientific Research Project of Tianjin Education Commission (2020Z049067002, 2020KJ020, 51905536, 2021YJS038)
- National Natural Science Foundation of China (2020Z049067002, 2020KJ020, 51905536, 2021YJS038)
- Graduate Research Innovation Project of CAUC (2020Z049067002, 2020KJ020, 51905536, 2021YJS038)
This publication has 29 references indexed in Scilit:
- Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paperInternational Journal of Adhesion and Adhesives, 2014
- Microstructural Characteristics and Wear Properties of NiCr/Cr3C2-WS2 Self-Lubricant Wear-Resistant Composite Coating on Ti6Al4V by Laser CladdingApplied Mechanics and Materials, 2013
- Effects of Ti and TiC ceramic powder on laser-cladded Ti–6Al–4V in situ intermetallic compositeApplied Surface Science, 2012
- Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coatingApplied Surface Science, 2012
- Effect of La2O3 addition on the microstructure, hardness and abrasive wear behavior of flame sprayed Ni based coatingsWear, 2009
- Laser clad Ni-base alloy added nano- and micron-size CeO2 compositesOptics & Laser Technology, 2008
- Effect of RE oxides on the microstructure of the coatings fabricated on titanium alloys by laser alloying techniqueScripta Materialia, 2006
- In-situ formation of self-lubricating tribo-films for dry machinabilitySurface and Coatings Technology, 2005
- Protection of titanium alloy components against high temperature corrosionMaterials Science and Engineering: A, 2003
- Mechanism of the High Temperature Oxidation of Titanium CarbideHigh Temperature Materials and Processes, 1997