Compressive Strength Analysis of Additively Manufactured Zirconia Honeycomb Sandwich Ceramic Parts with Different Cellular Structures
- 15 September 2024
- journal article
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 7 (5) , 939-945
Abstract
In this study, ZrO2 honeycomb sandwich structures with different cellular geometry were manufactured by SLA 3D-printing technology to analyze the compressive strength behaviour. After the printing procedure, the samples were sintered at 1450 °C for 2h. Among the samples with different cellular geometry, ZrO2 parts with circular cells were superior to that of square and triangular honeycomb structures and 1867±320 MPa compressive strength was obtained for this structure. The stress distributions in honeycomb structures were investigated using the COMSOL Multiphysics® for exposing the effect of cellular geometry on compressive strength. While more uniform stress distributions were seen on the inner wall of the circular honeycomb sample, the cellular structure of the square and triangle honeycomb samples mostly displayed compressive stress concentration on the joints of the honeycomb structure. Also, according to Rankine failure criterion, the parts with square cellular geometries were found to be more prone to failure. The highest specific compressive strength was obtained for the ZrO2 parts with circular cellular geometry. These findings demonstrated that the ZrO2 honeycomb sandwich structures with circular cellular geometry produced using SLA ceramic 3D-printing technology may be a suitable material to utilize in lightweight structural designs.Keywords
Funding Information
- Sivas University of Science and Techology Scientific Research Council (2022-GÜAP-Müh-0001)
This publication has 25 references indexed in Scilit:
- Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometriesCeramics International, 2023
- Fabrication of alumina ceramics with high flexural strength using stereolithographyThe International Journal of Advanced Manufacturing Technology, 2023
- Effect of Fe2O3 doping on color and mechanical properties of dental 3Y-TZP ceramics fabricated by stereolithography-based additive manufacturingCeramics International, 2022
- Stereolithography 3D printing of Si3N4 cellular ceramics with ultrahigh strength by using highly viscous pasteCeramics International, 2022
- Study on compression characteristics of honeycomb sandwich structure with multistage carbon fiber reinforced compositesPolymer Composites, 2022
- Optimal Design of a Composite Sandwich Panel with a Hexagonal Honeycomb Core for Aerospace ApplicationsIranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2022
- 3D printing of TPMS structural ZnO ceramics with good mechanical propertiesCeramics International, 2021
- Structure design influencing the mechanical performance of 3D printing porous ceramicsCeramics International, 2021
- A Review of 3D Printing Technologies for Soft Polymer MaterialsAdvanced Functional Materials, 2020
- Mechanical properties of zirconia periodic open cellular structuresCeramics International, 2019