Flat Inkjet‐Printed Copper Induction Coils for Magnetostrictive Structural Health Monitoring: A Comparison with Bulk Air Coils and an anisotropic magnetoresistive sensor (AMR) Sensor
Authors:
Open Access
- 22 June 2021
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 23 (9) , 2100313
Abstract
Structural health monitoring (SHM) represents the next generation of carbon fiber‐reinforced composite nondestructive testing. One challenge facing the application of magnetostrictive SHM is the lightweighting and ease of installation of actuators and sensors. Inkjet printing (IJP) technology is well suited to produce miniaturized electronic induction sensors that can be paired with magnetostrictive actuators to detect strain. These sensors have several advantages: their thicknesses can be minimized, the surface area can be maximized to increase sensitivity, and complex multifilar coil configurations can be fabricated. A parametric study of the efficacy of IJP induction coils with different parameters (number of coils, monofilar/bifilar, size) tested on a number of actuator‐functionalized composite coupons (FeSiB ribbon and impregnated epoxy sensors) is conducted. The samples are characterized by measuring their inductance response through induced strains. Increased sensitivity and accuracy of the 10‐turn monofilar IJP sensor are shown with respect to 1) 70‐turn hand‐wound coils, 2) a three‐axis AMR sensor, and 3) other IJP actuators with <10 turns. This is attributed to increased contact area to the composite surface and the requirement of minimum sensitivity (i.e., the number of turns and surface area) for strain detection.Keywords
This publication has 11 references indexed in Scilit:
- Printed Electronics as Prepared by Inkjet PrintingMaterials, 2020
- Design and Development of Magnetostrictive Actuators and Sensors for Structural Health MonitoringSensors, 2020
- Spin-valve giant magneto-resistance film with magnetostrictive FeSiB amorphous layer and its application to strain sensorsJournal of Applied Physics, 2018
- Experimental fabrication and nondestructive testing of carbon fiber beams for delaminations using embedded Terfenol-D particlesJournal of Intelligent Material Systems and Structures, 2017
- Role of inter-particle force between micro and nano magnetic particles on the stability of magnetorheological fluidAIP Advances, 2017
- Parallel Fluxgate Magnetometers2016
- Materials with high magnetostrictionIOP Conference Series: Materials Science and Engineering, 2014
- Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-reviewSmart Materials and Structures, 2002
- Sensing of Delaminations in Composite Laminates using Embedded Magnetostrictive Particle LayersJournal of Intelligent Material Systems and Structures, 1999
- Inductance formulas for circular and square coilsProceedings of the IEEE, 1982