Prediction of shape distortions during forming and welding of a double-curved strip geometry in alloy 718
Open Access
- 18 March 2020
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 107 (7-8) , 2967-2981
Abstract
The finite element method (FEM) has considerably contributed to the development of advanced manufacturing methods for metal structures. The prediction of the final shape of a component is of great interest to the manufacturing industry. The level of demand may increase due to multistage processes. Therefore, including all steps of the manufacturing chain in the simulations is a key to being successful. This has been done for a long time in the stamping industry, which involves sequences of forming, trimming, and springback. However, more complex manufacturing procedures that include assembling of formed parts with forgings and castings via welding have been modelled with simplifications, resulting in a reduced prediction accuracy. In the present study, a double-curved part manufactured from alloy 718 is formed at 20 °C and laser-welded using the bead-on-plate procedure. The coupling of different manufacturing analyses, including cold forming, trimming, result mapping, welding, cooling, and springback, is achieved using LS-DYNA. Additionally, the effect of adding a damage and failure model in the forming simulation is studied. The results of the forming analysis are used as inputs for the material model *MAT_CWM in the welding simulation. The anisotropic thermomechanical properties of alloy 718 are determined at temperatures up to 1000 °C. Encouraging agreement is found between the model predictions and the results of forming and welding tests. The findings underscore the importance of including the material history and accurate process conditions along the manufacturing chain to both the prediction accuracy of shape distortions, and to the potential of the industry.Keywords
Funding Information
- VINNOVA (2013-01173)
This publication has 22 references indexed in Scilit:
- Finite Element Analysis and In-Situ Measurement of Out-of-Plane Distortion in Thin Plate TIG WeldingMaterials, 2019
- Damage and fracture during sheet-metal forming of alloy 718International Journal of Material Forming, 2019
- Effect of jig constraint position and pitch on welding deformationJournal of Materials Processing Technology, 2015
- Simulation and validation of repair welding and heat treatment of an alloy 718 plateFinite Elements in Analysis and Design, 2012
- Finite element simulation of the manufacturing process chain of a sheet metal assemblyJournal of Materials Processing Technology, 2012
- Simulation of manufacturing chain of a titanium aerospace component with experimental validationFinite Elements in Analysis and Design, 2012
- Validation of three-dimensional finite element model for electron beam welding of Inconel 718Science and Technology of Welding and Joining, 2005
- Simulation of welding and stress relief heat treatment of an aero engine componentFinite Elements in Analysis and Design, 2003
- Prediction of Springback and Final Shape in Stamped Automotive Assemblies: Comparison of Finite Element Predictions and ExperimentsSAE International Journal of Advances and Current Practices in Mobility, 2002
- FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITYJournal of Thermal Stresses, 2001