Ground-motion networks in the Groningen field: usability and consistency of surface recordings
Authors:
- Michail NtinalexisMNMichail Ntinalexis
- Julian J. BommerJBJulian J. Bommer
- Elmer RuigrokERElmer Ruigrok
- Benjamin EdwardsBEBenjamin Edwards
- Rui PinhoRPRui Pinho
- Bernard DostBDBernard Dost
- António A. CorreiaAntónio A. Correia
- Jeroen UilenreefJUJeroen Uilenreef
- Peter J. StaffordPSPeter J. Stafford
- Jan van ElkJEJan van Elk
Open Access
- 28 October 2019
- journal article
- research article
- Published by Springer Nature in Journal of Seismology
- Vol. 23 (6) , 1233-1253
Abstract
Several strong-motion networks have been installed in the Groningen gas field in the Netherlands to record ground motions associated with induced earthquakes. There are now more than 450 permanent surface accelerographs plus a mobile array of 450 instruments, which, in addition to many instrumented boreholes, yield a wealth of data. The database of recordings has been of fundamental importance to the development of ground-motion models that form a key element of the seismic hazard and risk estimations for the field. In order to maximise the benefit that can be derived from these recordings, this study evaluates the usability of the recordings from the different networks, in general terms and specifically with regards to the frequency ranges with acceptable signal-to-noise ratios. The study also explores the consistency among the recordings from the different networks, highlighting in particular how a configuration error was identified and resolved. The largest accelerograph network consists of instruments housed in buildings around the field, frequently installed on the lower parts of walls rather than on the floor. A series of experiments were conducted, using additional instruments installed adjacent to these buildings and replicating the installation configuration in full-scale shake table tests, to identify the degree to which structural response contaminated the recordings. The general finding of these efforts was that for PGV and oscillator periods above 0.1 s, the response spectral ordinates from these recordings can be used with confidence.Keywords
This publication has 31 references indexed in Scilit:
- Framework for Developing Fragility and Consequence Models for Local Personal RiskEarthquake Spectra, 2017
- Framework for a Ground‐Motion Model for Induced Seismic Hazard and Risk Analysis in the Groningen Gas Field, The NetherlandsEarthquake Spectra, 2017
- Comment on “The Maximum Possible and the Maximum Expected Earthquake Magnitude for Production‐Induced Earthquakes at the Gas Field in Groningen, The Netherlands” by Gert Zöller and Matthias HolschneiderBulletin of the Seismological Society of America, 2017
- An integrated shear-wave velocity model for the Groningen gas field, The NetherlandsBulletin of Earthquake Engineering, 2017
- Sensor density or sensor sensitivity?The Leading Edge, 2016
- On the Relationship between Fourier and Response Spectra: Implications for the Adjustment of Empirical Ground‐Motion Prediction Equations (GMPEs)Bulletin of the Seismological Society of America, 2016
- A Monte Carlo Method for Probabilistic Hazard Assessment of Induced Seismicity due to Conventional Natural Gas ProductionBulletin of the Seismological Society of America, 2015
- The high‐frequency limit of usable response spectral ordinates from filtered analogue and digital strong‐motion accelerogramsEarthquake Engineering & Structural Dynamics, 2011
- Influence of long-period filter cut-off on elastic spectral displacementsEarthquake Engineering & Structural Dynamics, 2006
- Processing of strong-motion accelerograms: needs, options and consequencesSoil Dynamics and Earthquake Engineering, 2005