Michail Ntinalexis
Research Subjects
Michail Ntinalexis has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Julian J. Bommer
Department of civil and environmental engineering Imperial College London London UK
4 shared publications - Benjamin Edwards
School of Environmental Sciences, University of Liverpool, Liverpool, United Kingdom
3 shared publications Jan van Elk
Nederlandse Aardolie Maatschappij, Assen, Netherlands
3 shared publications- Adrian Rodriguez-Marek
Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, USA
2 shared publications - Bernard Dost
Royal Netherlands Meteorological Institute (KNMI)
2 shared publications - Elmer Ruigrok
Department of Earth Sciences, Utrecht University, Utrecht, The Netherlands
2 shared publications
Latest Publications
- Open Access
- 18 December 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (4) , 2647-2662
Reconstruction of Clipped Time-History Records, with Application to Ground Motions from the 1992 ML 5.8 Roermond, Netherlands, Earthquake
Analog-to-digital conversion of time-history data can lead to amplitude truncation (known as clipping) in cases in which a signal exceeds the full-scale range of the digitizer. When digitizers are configured, it is necessary to balance two competing requirements: maximizing instruments’ full-scale range for recording large amplitudes, while ensuring weak signals are recorded with sufficient resolution. An example of this trade-off is seen when recording earthquake ground motions, which span several orders of magnitude: from weak-motion teleseisms or local microseismicity, through to large-magnitude earthquakes. This can lead to clipped records in which strong ground motions saturate instruments configured to record weak signals. To address this problem, we present a new approach: nonstationary clipped waveform restoration, CWRΔt. The approach is capable of reconstructing even severely clipped waveforms, truncated at as low as 10% of true peak motion. The approach is based on “Projection onto Convex Sets” and builds upon the stationary and deterministic CWR method of Zhang et al. (2016). A key advantage of the method presented herein lies with the characterization of temporal uncertainties that can be propagated into other domains such as Fourier, power spectral density, or damped pseudospectral amplitude. We benchmark the method against artificially clipped ground-motion records from the European Engineering Strong-Motion database. A significant improvement is demonstrated with respect to the original CWR method. Clipped records from the 1992 ML 5.8 Roermond, Netherlands, earthquake are then reconstructed. This key event in northwestern Europe stands as the region’s largest instrumentally recorded earthquake, but from which the majority of records have, until now, been unusable. We successfully verify the CWRΔt approach against ground-truth records through comparison with collocated clipped/unclipped records from high- and low-gain instruments at three sites. Finally, we apply the method to clipped records in the epicentral region, providing the tool to develop a key data set for engineering seismology in Europe. The proposed method has a multitude of applications beyond seismology, being generalizable to any time-history data.
- 18 December 2025
- Published by Seismological Society of America (SSA) in Seismological Research Letters
- Vol. 97 (4) , 2647-2662
Open AccessReconstruction of Clipped Time-History Records, with Application to Ground Motions from the 1992 ML 5.8 Roermond, Netherlands, Earthquake
Analog-to-digital conversion of time-history data can lead to amplitude truncation (known as clipping) in cases in which a signal exceeds the full-scale range of the digitizer. When digitizers are configured, it is necessary to balance two competing requirements: maximizing instruments’ full-scale range for recording large amplitudes, while ensuring weak signals are recorded with sufficient resolution. An example of this trade-off is seen when recording earthquake ground motions, which span several orders of magnitude: from weak-motion teleseisms or local microseismicity, through to large-magnitude earthquakes. This can lead to clipped records in which strong ground motions saturate instruments configured to record weak signals. To address this problem, we present a new approach: nonstationary clipped waveform restoration, CWRΔt. The approach is capable of reconstructing even severely clipped waveforms, truncated at as low as 10% of true peak motion. The approach is based on “Projection onto Convex Sets” and builds upon the stationary and deterministic CWR method of Zhang et al. (2016). A key advantage of the method presented herein lies with the characterization of temporal uncertainties that can be propagated into other domains such as Fourier, power spectral density, or damped pseudospectral amplitude. We benchmark the method against artificially clipped ground-motion records from the European Engineering Strong-Motion database. A significant improvement is demonstrated with respect to the original CWR method. Clipped records from the 1992 ML 5.8 Roermond, Netherlands, earthquake are then reconstructed. This key event in northwestern Europe stands as the region’s largest instrumentally recorded earthquake, but from which the majority of records have, until now, been unusable. We successfully verify the CWRΔt approach against ground-truth records through comparison with collocated clipped/unclipped records from high- and low-gain instruments at three sites. Finally, we apply the method to clipped records in the epicentral region, providing the tool to develop a key data set for engineering seismology in Europe. The proposed method has a multitude of applications beyond seismology, being generalizable to any time-history data.
- Open Access
- 1 February 2023
- Published by Wiley in Earthquake Spectra
- Vol. 39 (1) , 687-701
A database of ground motion recordings, site profiles, and amplification factors from the Groningen gas field in the Netherlands
A comprehensive database that has been used to develop ground motion models for induced earthquakes in the Groningen gas field is provided in a freely accessible online repository. The database includes more than 8500 processed ground motion recordings from 87 earthquakes of local magnitude M L between 1.8 and 3.6, obtained from a large network of surface accelerographs and borehole geophones placed at 50 m depth intervals to a depth of 200 m. The 5%‐damped pseudo‐acceleration spectra and Fourier amplitude spectra of the records are also provided. Measured shear‐wave velocity (V S ) profiles, obtained primarily from seismic Cone Penetration Tests (CPTs), are provided for 80 of the ∼100 recording stations. A model representing the regional dynamic soil properties is presented for the entire gas field plus a 5 km onshore buffer zone, specifying lithology, V S , and damping for all layers above the reference baserock horizon located at about 800 m depth. Transfer functions and frequency‐dependent amplification factors from the reference rock horizon to the surface for the locations of the recording stations are also included. The database provides a valuable resource for further refinement of induced seismic hazard and risk modeling in Groningen as well as for generic research in site response of thick, soft soil deposits and the characteristics of ground motions from small‐magnitude, shallow‐focus induced earthquakes.
- 1 February 2023
- Published by Wiley in Earthquake Spectra
- Vol. 39 (1) , 687-701
Open AccessA database of ground motion recordings, site profiles, and amplification factors from the Groningen gas field in the Netherlands
A comprehensive database that has been used to develop ground motion models for induced earthquakes in the Groningen gas field is provided in a freely accessible online repository. The database includes more than 8500 processed ground motion recordings from 87 earthquakes of local magnitude M L between 1.8 and 3.6, obtained from a large network of surface accelerographs and borehole geophones placed at 50 m depth intervals to a depth of 200 m. The 5%‐damped pseudo‐acceleration spectra and Fourier amplitude spectra of the records are also provided. Measured shear‐wave velocity (V S ) profiles, obtained primarily from seismic Cone Penetration Tests (CPTs), are provided for 80 of the ∼100 recording stations. A model representing the regional dynamic soil properties is presented for the entire gas field plus a 5 km onshore buffer zone, specifying lithology, V S , and damping for all layers above the reference baserock horizon located at about 800 m depth. Transfer functions and frequency‐dependent amplification factors from the reference rock horizon to the surface for the locations of the recording stations are also included. The database provides a valuable resource for further refinement of induced seismic hazard and risk modeling in Groningen as well as for generic research in site response of thick, soft soil deposits and the characteristics of ground motions from small‐magnitude, shallow‐focus induced earthquakes.
- Open Access
- 7 November 2022
- Published by Springer Nature in Journal of Seismology
- Vol. 26 (6) , 1157-1184
Ground-motion prediction models for induced earthquakes in the Groningen gas field, the Netherlands
Small-magnitude earthquakes induced by gas production in the Groningen field in the Netherlands have prompted the development of seismic risk models that serve both to estimate the impact of these events and to explore the efficacy of different risk mitigation strategies. A core element of the risk modelling is ground-motion prediction models (GMPM) derived from an extensive database of recordings obtained from a dense network of accelerographs installed in the field. For the verification of damage claims, an empirical GMPM for peak ground velocity (PGV) has been developed, which predicts horizontal PGV as a function of local magnitude,ML; hypocentral distance,Rhyp; and the time-averaged shear-wave velocity over the upper 30 m,VS30. For modelling the risk due to potential induced and triggered earthquakes of larger magnitude, a GMPM for response spectral accelerations has been developed from regressions on the outputs from finite-rupture simulations of motions at a deeply buried rock horizon. The GMPM for rock motions is coupled with a zonation map defining frequency-dependent non-linear amplification factors to obtain estimates of surface motions in the region of thick deposits of soft soils. The GMPM for spectral accelerations is formulated within a logic-tree framework to capture the epistemic uncertainty associated with extrapolation from recordings of events ofML ≤ 3.6 to much larger magnitudes.
- 7 November 2022
- Published by Springer Nature in Journal of Seismology
- Vol. 26 (6) , 1157-1184
Open AccessGround-motion prediction models for induced earthquakes in the Groningen gas field, the Netherlands
Small-magnitude earthquakes induced by gas production in the Groningen field in the Netherlands have prompted the development of seismic risk models that serve both to estimate the impact of these events and to explore the efficacy of different risk mitigation strategies. A core element of the risk modelling is ground-motion prediction models (GMPM) derived from an extensive database of recordings obtained from a dense network of accelerographs installed in the field. For the verification of damage claims, an empirical GMPM for peak ground velocity (PGV) has been developed, which predicts horizontal PGV as a function of local magnitude,ML; hypocentral distance,Rhyp; and the time-averaged shear-wave velocity over the upper 30 m,VS30. For modelling the risk due to potential induced and triggered earthquakes of larger magnitude, a GMPM for response spectral accelerations has been developed from regressions on the outputs from finite-rupture simulations of motions at a deeply buried rock horizon. The GMPM for rock motions is coupled with a zonation map defining frequency-dependent non-linear amplification factors to obtain estimates of surface motions in the region of thick deposits of soft soils. The GMPM for spectral accelerations is formulated within a logic-tree framework to capture the epistemic uncertainty associated with extrapolation from recordings of events ofML ≤ 3.6 to much larger magnitudes.
- Open Access
- 9 January 2020
- Published by Springer Nature in Journal of Seismology
- Vol. 24 (2) , 263-292
A database of damaging small-to-medium magnitude earthquakes
Interest in small-to-medium magnitude earthquakes and their potential consequences has increased significantly in recent years, mostly due to the occurrence of some unusually damaging small events, the development of seismic risk assessment methodologies for existing building stock, and the recognition of the potential risk of induced seismicity. As part of a clear ongoing effort of the earthquake engineering community to develop knowledge on the risk posed by smaller events, a global database of earthquakes with moment magnitudes in the range from 4.0 to 5.5 for which damage and/or casualties have been reported has been compiled and is made publicly available. The two main purposes were to facilitate studies on the potential for earthquakes in this magnitude range to cause material damage and to carry out a statistical study to characterise the frequency with which earthquakes of this size cause damage and/or casualties (published separately). The present paper describes the data sources and process followed for the compilation of the database, while providing critical discussions on the challenges encountered and decisions made, which are of relevance for its interpretation and use. The geographic, temporal, and magnitude distributions of the 1958 earthquakes that make up the database are presented alongside the general statistics on damage and casualties, noting that these stem from a variety of sources of differing reliability. Despite its inherent limitations, we believe it is an important contribution to the understanding of the extent of the consequences that may arise from earthquakes in the magnitude range of study.
- 9 January 2020
- Published by Springer Nature in Journal of Seismology
- Vol. 24 (2) , 263-292
Open AccessA database of damaging small-to-medium magnitude earthquakes
Interest in small-to-medium magnitude earthquakes and their potential consequences has increased significantly in recent years, mostly due to the occurrence of some unusually damaging small events, the development of seismic risk assessment methodologies for existing building stock, and the recognition of the potential risk of induced seismicity. As part of a clear ongoing effort of the earthquake engineering community to develop knowledge on the risk posed by smaller events, a global database of earthquakes with moment magnitudes in the range from 4.0 to 5.5 for which damage and/or casualties have been reported has been compiled and is made publicly available. The two main purposes were to facilitate studies on the potential for earthquakes in this magnitude range to cause material damage and to carry out a statistical study to characterise the frequency with which earthquakes of this size cause damage and/or casualties (published separately). The present paper describes the data sources and process followed for the compilation of the database, while providing critical discussions on the challenges encountered and decisions made, which are of relevance for its interpretation and use. The geographic, temporal, and magnitude distributions of the 1958 earthquakes that make up the database are presented alongside the general statistics on damage and casualties, noting that these stem from a variety of sources of differing reliability. Despite its inherent limitations, we believe it is an important contribution to the understanding of the extent of the consequences that may arise from earthquakes in the magnitude range of study.
- Open Access
- 28 October 2019
- Published by Springer Nature in Journal of Seismology
- Vol. 23 (6) , 1233-1253
Ground-motion networks in the Groningen field: usability and consistency of surface recordings
Several strong-motion networks have been installed in the Groningen gas field in the Netherlands to record ground motions associated with induced earthquakes. There are now more than 450 permanent surface accelerographs plus a mobile array of 450 instruments, which, in addition to many instrumented boreholes, yield a wealth of data. The database of recordings has been of fundamental importance to the development of ground-motion models that form a key element of the seismic hazard and risk estimations for the field. In order to maximise the benefit that can be derived from these recordings, this study evaluates the usability of the recordings from the different networks, in general terms and specifically with regards to the frequency ranges with acceptable signal-to-noise ratios. The study also explores the consistency among the recordings from the different networks, highlighting in particular how a configuration error was identified and resolved. The largest accelerograph network consists of instruments housed in buildings around the field, frequently installed on the lower parts of walls rather than on the floor. A series of experiments were conducted, using additional instruments installed adjacent to these buildings and replicating the installation configuration in full-scale shake table tests, to identify the degree to which structural response contaminated the recordings. The general finding of these efforts was that for PGV and oscillator periods above 0.1 s, the response spectral ordinates from these recordings can be used with confidence.
- 28 October 2019
- Published by Springer Nature in Journal of Seismology
- Vol. 23 (6) , 1233-1253
Open AccessGround-motion networks in the Groningen field: usability and consistency of surface recordings
Several strong-motion networks have been installed in the Groningen gas field in the Netherlands to record ground motions associated with induced earthquakes. There are now more than 450 permanent surface accelerographs plus a mobile array of 450 instruments, which, in addition to many instrumented boreholes, yield a wealth of data. The database of recordings has been of fundamental importance to the development of ground-motion models that form a key element of the seismic hazard and risk estimations for the field. In order to maximise the benefit that can be derived from these recordings, this study evaluates the usability of the recordings from the different networks, in general terms and specifically with regards to the frequency ranges with acceptable signal-to-noise ratios. The study also explores the consistency among the recordings from the different networks, highlighting in particular how a configuration error was identified and resolved. The largest accelerograph network consists of instruments housed in buildings around the field, frequently installed on the lower parts of walls rather than on the floor. A series of experiments were conducted, using additional instruments installed adjacent to these buildings and replicating the installation configuration in full-scale shake table tests, to identify the degree to which structural response contaminated the recordings. The general finding of these efforts was that for PGV and oscillator periods above 0.1 s, the response spectral ordinates from these recordings can be used with confidence.