Effect of machining parameters on average surface roughness during computer numerical controlled dry milling of high strength AISI 420 martensitic stainless steel
- 29 August 2024
- journal article
- research article
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (3) , 035549
Abstract
This study focuses on developing an empirical model for average surface roughness during computer numerical controlled (CNC) dry milling of AISI 420 martensitic stainless steel, utilizing response surface methodology (RSM). Experiments were designed with three levels of axial depth of cut, feed rate, and spindle speed to quantify their impact on surface roughness. The RSM-Box-Behnken design was employed to construct the empirical model. Model adequacy was validated through residual analysis and analysis of variance (ANOVA). Analysis of the main effects and interaction effects revealed that the primary influences on average surface roughness were the feed rate, spindle speed, and axial depth of cut, while interaction effects were less significant. Optimal cutting conditions were determined to be a spindle speed of 1500 rpm, a feed rate of 30 mm min−1, and an axial depth of cut of 0.3 mm. The model’s validity was further confirmed through additional validation tests.Keywords
This publication has 20 references indexed in Scilit:
- Correlation Analysis of Vibration Signal Frequency with Tool Wear During the Milling Process on Martensitic Stainless Steel MaterialArabian Journal for Science and Engineering, 2023
- Hard yet tough and self-lubricating (CuNiTiNbCr)C high-entropy nanocomposite films: Effects of carbon content on structure and propertiesJournal of Materials Science & Technology, 2023
- Investigation of Coated Tool Performance on the Machinability, Surface Residual Stress and Chip Morphology of Martensitic AISI 420 SteelArabian Journal for Science and Engineering, 2021
- Response Surface Methodology (RSM) Model to Evaluate Surface Roughness in Machining of Titanium Alloy (Ti6–Al–4V) Using End Milling Process2021
- Optimization of machining parameters on AA6351 alloy steel using Response Surface Methodology (RSM)Materials Today: Proceedings, 2020
- Optimization of Parameters in CNC milling of P20 steel using Response Surface methodology and Taguchi MethodMaterials Today: Proceedings, 2017
- Cutting tool temperature prediction method using analytical model for end millingChinese Journal of Aeronautics, 2016
- Surface roughness prediction of flow-formed AA6061 alloy by design of experimentsJournal of Materials Processing Technology, 2008
- Surface roughness optimization in an end-milling operation using the Taguchi design methodJournal of Materials Processing Technology, 2007
- Roughness modeling in up-face millingThe International Journal of Advanced Manufacturing Technology, 2005