Characterization of failure mechanism in glass, carbon and their hybrid composite laminates in epoxy resin by acoustic emission monitoring
- 18 March 2019
- journal article
- research article
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 34 (3) , 254-266
Abstract
Fibre reinforced plastic (FRP) composites are being widely utilized in various industries because of their superior mechanical properties. Besides their advantages, failure of these composites can occur either by an individual or an associated of various failure modes which are very difficult to distinguish and discriminate the damages. This paper focuses on solving this issue, by characterizing the various failure modes in glass, carbon and their hybrid composite laminates in epoxy resin under uni-axial tensile loading with acoustic emission (AE) monitoring. AE data recorded during the testing of a pure-resin specimen and the single-layer specimen were used to identify the matrix cracking and debonding, respectively, whereas delamination was predominant in a two-layer specimen. The fibre failure was obtained from the resin impregnated single fibre strand. The parametric studies using AE amplitude, duration, AE cumulative counts, AE cumulative energy, rise angle (RA) and peak frequency were used to describe the damage mechanism of the different stacking sequence of glass fibre reinforced plastic (GFRP), carbon fibre reinforced plastic (CFRP) and their hybrid composite laminates. The mechanical parameter and AE parameter was successfully correlated for discrimination of damage mechanism. The individual failure mode of glass, carbon and their hybrid composite laminates with the most critical damage mechanisms and the time-to-failure were investigated.Keywords
This publication has 25 references indexed in Scilit:
- A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emissionMaterials & Design (1980-2015), 2012
- Classification of AE transients based on numerical simulations of composite laminatesNDT & E International, 2003
- Characteristics of AE signals obtained during drilling composite laminatesNDT & E International, 2000
- An acoustic-emission characterization of the failure modes in polymer-composite materialsComposites Science and Technology, 1998
- Listening to the sound of materials: Acoustic emission for the analysis of material behaviourNDT & E International, 1997
- On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropyleneComposites Science and Technology, 1994
- Acoustic emission in carbon fibre compositesComposites Science and Technology, 1990
- Monitoring Progression of Matrix Splitting During Fatigue Loading Through Acoustic Emission in Notched Unidirectional Graphite/Epoxy CompositeJournal of Reinforced Plastics and Composites, 1988
- Acoustic Emission Monitoring of Damage Progression in Graphite/Epoxy LaminatesJournal of Reinforced Plastics and Composites, 1985
- Acoustic Emission Monitoring of Fiber Composite Materials and StructuresJournal of Composite Materials, 1978