Melting and Generation of Micro-Protrusions on Cathode Surface During Spark Conditioning Process in Vacuum
- 9 May 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 29 (3) , 1160-1166
Abstract
Spark conditioning is an effective method to increase the dielectric strength in vacuum by melting and removing micro-protrusions on the cathode surface. We aim to optimize the conditioning effect in vacuum for the application of vacuum circuit breakers (VCBs) to higher voltage levels. To obtain high breakdown (BD) voltage, the control of BD charge in the conditioning process is required. When a BD occurs, we have suggested that micro-protrusions can be generated on the cathode surface by particles from the anode. For the suitable control of BD charge, the meltability of generated micro-protrusions and their size are important. In this paper, we focus on the generation of micro-protrusions on the cathode surface in conditioning process. First, we conduct spark conditioning by repetitive impulse voltages of rod-plane electrodes made of OFHC Cu in a vacuum chamber with different BD charge. After that, we observe the surface of rod cathode with a digital microscope in order to count the number of visible protrusions and measure their radii. By considering the meltability of micro-protrusions, we quantitatively reveal the existence of residual protrusions that cannot be completely melted by BD. Next, we estimate the maximum size of generated micro-protrusions by BD charge. In consideration of the collision of ions into the anode accelerated by the anode sheath voltage, we estimate the meltable amount of anode material by the BD charge. We confirm that the radii of experimentally measured protrusions are close to the estimated ones. Moreover, we consider the difference in dielectric strength due to the difference in the initial surface condition of the electrodes. We clarify that the dielectric strength is improved by applying acid wash and heat treatment to the electrodes before conditioning, which can be optimized by the BD charge and the initial surface condition of the electrode.Keywords
This publication has 8 references indexed in Scilit:
- Suppression of Conditioning Effect in Vacuum by Micro-protrusions from Anode2019
- Discharge and breakdown mechanism transition in the conditioning process between plane-plane copper electrodes in vacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- Effect of Initial Electrode Surface and Breakdown Charge on Spark Conditioning in Vacuum under Non-Uniform Electric Field2018
- Dependence of spark conditioning on breakdown charge and electrode material under a non-uniform electric field in vacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2016
- Optimum breakdown charge for spark conditioning in vacuum under non-uniform electric field2016
- History of vacuum circuit breakers and recent developments in JapanIEEE Transactions on Dielectrics and Electrical Insulation, 2006
- Simulation of Switching Arc Using Modified Mayr Arc ModelIEEJ Transactions on Power and Energy, 2002
- Anode Spot Instability I. The Homogeneous Short Gap InstabilityIEEE Transactions on Plasma Science, 1974