NKNaoki Kita

Naoki Kita

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naoki Kita has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Breakdown Charge Dependence of Counter Electrode Material Adhesion and Dielectric Strength After Spark Conditioning in Vacuum

    by Naoki Kita, Hiroki Kojima, Naoki Hayakawa, Hideaki Fukuda, Kenta Yamamura, Kazuhiro Nagatake

    Spark conditioning is an effective method of increasing the dielectric strength in vacuum. In this paper, we discuss the breakdown (BD) charge dependence of counter electrode material adhesion and dielectric strength after spark conditioning. We have applied a negative impulse voltage to a rod-plane electrode configuration with a cathode and an anode made of stainless steel (SUS) that is defined as SUS304 by JIS G 4303 or oxygen free high conductivity copper (Cu). The electrode system of cathode SUS and anode Cu is called SUS-Cu electrode system, and the electrode system of cathode Cu and anode SUS is called Cu-SUS electrode system. We have changed BD charge (QBD) in conditioning by changing the limiting resistance in the experimental circuit. As a result, in both cases of SUS-Cu and Cu-SUS electrode systems, the larger the QBD, the smaller the amount of the anode material adhered to the cathode surface. When QBD is large, the dielectric strength increases in SUS-Cu electrode system and decreases in Cu-SUS electrode system. From these results, when QBD is large, we consider that the conditioning characteristics are less likely to be dominated by the anode material, i.e. Cu in the case of SUS-Cu electrode system and SUS in the case of Cu-SUS electrode system. In other words, the decisive parameters such as QBD to maximize the dielectric strength may depend on the combination of electrode materials.


  • Melting and Generation of Micro-Protrusions on Cathode Surface During Spark Conditioning Process in Vacuum

    by Naoki Kita, Fuminori Kondo, Hiroki Kojima, Naoki Hayakawa, Hideaki Fukuda, Kenta Yamamura

    Spark conditioning is an effective method to increase the dielectric strength in vacuum by melting and removing micro-protrusions on the cathode surface. We aim to optimize the conditioning effect in vacuum for the application of vacuum circuit breakers (VCBs) to higher voltage levels. To obtain high breakdown (BD) voltage, the control of BD charge in the conditioning process is required. When a BD occurs, we have suggested that micro-protrusions can be generated on the cathode surface by particles from the anode. For the suitable control of BD charge, the meltability of generated micro-protrusions and their size are important. In this paper, we focus on the generation of micro-protrusions on the cathode surface in conditioning process. First, we conduct spark conditioning by repetitive impulse voltages of rod-plane electrodes made of OFHC Cu in a vacuum chamber with different BD charge. After that, we observe the surface of rod cathode with a digital microscope in order to count the number of visible protrusions and measure their radii. By considering the meltability of micro-protrusions, we quantitatively reveal the existence of residual protrusions that cannot be completely melted by BD. Next, we estimate the maximum size of generated micro-protrusions by BD charge. In consideration of the collision of ions into the anode accelerated by the anode sheath voltage, we estimate the meltable amount of anode material by the BD charge. We confirm that the radii of experimentally measured protrusions are close to the estimated ones. Moreover, we consider the difference in dielectric strength due to the difference in the initial surface condition of the electrodes. We clarify that the dielectric strength is improved by applying acid wash and heat treatment to the electrodes before conditioning, which can be optimized by the BD charge and the initial surface condition of the electrode.