Energy-Autonomous Cooling of Open Spaces—The Impact of Thermal Comfort Temperature on the Cooperation of the Cooling System with the PV Installation
Open Access
Abstract
Climate change and rising temperatures in cities due to the urban heat island (UHI) effect are causing increased heat stress and driving the development of efficient, sustainable outdoor cooling systems. The aim of this article was to analyze the integration of adiabatic air cooling systems with photovoltaic (PV) installations in the context of improving thermal comfort and energy autonomy. The study was conducted on the example of a bus station in Rzeszow (Poland), considering two system variants: indirect evaporative cooling and direct evaporative cooling. To assess the impact of comfort parameters on the number of hours of system operation, energy consumption, and operating costs, four upper thermal comfort limits were considered: 22 °C, 22.9 °C, 24 °C, and 25 °C. The results indicate that increasing the upper limit of thermal comfort reduces the operating time of the system and significantly reduces the demand for cooling—for example, increasing the thermal comfort range from 22.9 °C to 24 °C reduces useful energy by 41%. Assuming a thermal comfort range of 25 °C, the direct evaporative cooling system achieves full energy autonomy and is fully powered by photovoltaics. Life cycle analysis (LCA) and life cycle cost (LCC) confirmed the environmental and economic benefits of using higher thermal comfort values. The study highlights the potential of adiabatic cooling systems, in conjunction with a local photovoltaic installation, as an adaptive solution that improves thermal comfort in urban spaces with minimal energy consumption from the grid.Keywords
All Related Versions
This publication has 52 references indexed in Scilit:
- A comprehensive review of thermal comfort related design strategy of semi-outdoor transitional spacesEnergy and Buildings, 2025
- Urban heat island impacts on mental health in middle-aged and older adultsEnvironment International, 2025
- Challenges and future directions in evaporative cooling: Balancing sustainable cooling with microbial safetyBuilding and Environment, 2024
- Seasonal energy efficiency ratio of regenerative indirect evaporative coolers—Simplified calculation methodApplied Thermal Engineering, 2022
- UTCI—10 years of applicationsInternational Journal of Biometeorology, 2021
- A review of recent advances in indirect evaporative cooling technologyInternational Communications in Heat and Mass Transfer, 2021
- Evaluating the effectiveness of outdoor evaporative cooling in a hot, arid climateBuilding and Environment, 2019
- Performance improvement of a split air conditioner by using an energy saving deviceEnergy and Buildings, 2018
- A comprehensive catalogue and classification of human thermal climate indicesInternational Journal of Biometeorology, 2014
- The physiological equivalent temperature - a universal index for the biometeorological assessment of the thermal environmentInternational Journal of Biometeorology, 1999