Optimization Design of Shielding Cover for Valve-Side Bushings Considering Interface Charge and Electric Field Distributions
Authors:
- Minjie LiMLMinjie Li
- Gaoyi ShangGSGaoyi Shang
- WanHao SHIWSWanHao SHI
- Hao SunHSHao Sun
- Xueyang BaiXBXueyang Bai
- Hao TangHTHao Tang
- Yi ZhangYZYi Zhang
- Xuandong LiuXLXuandong Liu
Preprint
- 29 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Frequent gas-solid interface flashover accidents on valve-side bushings seriously threaten the safe operation of ultra-high voltage direct current (UHVDC) systems. However, optimizing their shielding cover structures still lacks systematic theoretical support. This paper establishes a electric-thermal-ion transport multi-physics coupled model of ±800 kV valve-side bushing. The influence mechanism of the shield cover structure (width, gap distance, and chamfer radius) on charge accumulation and electric field distortion at the core end is studied. Results show that the shield width is the dominant parameter affecting the charge and electric field peaks at the core end. Broadening width from 50 mm to 80 mm suppresses them by over 40% and the peak electric field shift toward the long surface. However, once the electric field peak fully appears on the long surface, further widening offers limited benefit. Meanwhile, gap distance and chamfer radius act locally, suppressing charge density and electric field at gap surface while rebounding the peaks at corner arc. Based on these variation law, a dimensionless design criterion incorporating a corner arc concentration factor (Kc) and a gap non-uniformity factor (Kgap) are proposed, which translate complex electric variation trends into empirical formulas. Ultimately, the optimal shield dimensions for a ±800 kV bushing are identified as w = 80 mm, d = 5–8 mm, and r = 5–30 mm.Keywords
This publication has 8 references indexed in Scilit:
- A Promising De-Ionized Water Cooling Based ERIP Bushing-II: Cooling Mechanism and Effect of ParametersIEEE Transactions on Power Delivery, 2022
- A Promising De-Ionized Water Cooling Based ERIP Bushing-I: Model Validation and High Cooling Efficiency of the Cooling MethodIEEE Transactions on Power Delivery, 2022
- Effects of non‐linear conductivity on charge trapping and de‐trapping behaviours in epoxy/SiC composites under DC stressIET Science, Measurement & Technology, 2018
- Surface modification of polymethyl-methacrylate using atmospheric pressure argon plasma jets to improve surface flashover performance in vacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Structural design for dc bushing core based on the material lifeIEEE Transactions on Dielectrics and Electrical Insulation, 2013
- Dielectric study of low glass transition temperature cycloaliphatic UV-curable epoxy networksIEEE Transactions on Dielectrics and Electrical Insulation, 2012
- Thermal and Electrical Properties of Aluminum Nitride Filled Epoxy-resin CompoundIEEE Transactions on Dielectrics and Electrical Insulation, 2008
- Nano/Micro Dielectric Surface Flashover in Partial VacuumIEEE Transactions on Dielectrics and Electrical Insulation, 2007