Pre-Phased 1-bit Reflective Passive Metasurface With Optimum Number of Pre-Phasing for Low QLL and SLL at 140 GHz
- 11 December 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (2) , 975-985
Abstract
Recent advancements introduced a pre-phased reflective metasurface (MS) using 1-bit control to suppress the quantization lobe (QL) inherent in a typical 1-bit MS under plane wave incidence, particularly in millimeter and sub-millimeter wave bands. However, the optimal method for pre-phasing using random phases has yet to be fully explored. This study investigates the optimal number of pre-phasing, which denotes the minimum number of discrete random phases for effective suppression of QLs and side lobes while ensuring low design complexity. The results indicate that employing four discrete phases, equally spaced at 45° intervals, is the optimal solution for both normal and oblique incidences. The random phases with a 45° separation are implemented into four pairs of unit cells with passive ON/OFF switching using multilayer PCBs at 140 GHz. Each unit cell consisted of a metallic patch coupled to a transmission (Tx) line through a slot, with embedded static ON/OFF switching in the Tx line to enable 1-bit reflection phase control. Finally, three MSs with 30 × 30 unit cells, each with fixed random pre-phases, are designed and fabricated to reflect normal incidence at reflection angles (θ r ) of 15°, 30°, and 45° at 140 GHz. The experiment results demonstrate peak reflected beams at 15°, 29°, and 45° with frequencies of 139.7 GHz, 139.1 GHz, and 135.9 GHz, respectively. In addition, significant reductions in QL to −20 dB were observed, along with reflection efficiency of 26%, and a 3 dB gain bandwidth exceeding 10%, on average, across all reflection angles in the 140 GHz band.Keywords
Funding Information
- Korean Government Ministry of Science and ICT (MSIT) through the Innovative Fusion Technologies of Intelligent Antenna Material/Structure/Network for THz 6G (2021-0-00763)
This publication has 25 references indexed in Scilit:
- Compact folded dipole metasurface for high anomalous reflection angles with low harmonic levelsScientific Reports, 2020
- Wireless Communications and Applications Above 100 GHz: Opportunities and Challenges for 6G and BeyondIEEE Access, 2019
- Anomalously Perfect Reflections Based on 3‐Bit Coding MetasurfacesAdvanced Optical Materials, 2019
- Design of 1-Bit Coding Engineered Reflectors for EM-Wave Shaping and RCS ModificationsIEEE Access, 2018
- Concepts, Working Principles, and Applications of Coding and Programmable MetamaterialsAdvanced Optical Materials, 2017
- A Review of Wideband Reflectarray Antennas for 5G Communication SystemsIEEE Access, 2017
- A programmable metasurface with dynamic polarization, scattering and focusing controlScientific Reports, 2016
- Coding metamaterials, digital metamaterials and programmable metamaterialsLight: Science & Applications, 2014
- Reflectarray Antennas2007
- Aperture-coupled patch antenna on UC-PBG substrateIEEE Transactions on Microwave Theory and Techniques, 1999