SLSangmin Lee

Sangmin Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sangmin Lee has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On the Synthesis of Aperiodic Multi-Atom 1-Bit Reconfigurable Passive EMSs at 140 GHz

    by Taeyoung Kim, Francesco Zardi, Sangmin Lee, Jinhyun Kim, Uichan Park, Jungsuek Oh, Sangjo Choi, Giacomo Oliveri

    An innovative reconfigurable passive electromagnetic skin (RP-EMS) architecture is proposed to support a single reflection beam while suppressing undesired beams, using 1-bit switching with minimal hardware complexity. The architecture is the first to simultaneously optimize the meta-atom arrangement and their 1-bit switching descriptors using the integer-coded evolutionary algorithm, supporting multiple reflection scenarios. The process yields one aperiodic meta-atom arrangement that effectively mitigates periodic phase quantization errors typical of 1-bit RP-EMS layouts, while changing reflection angles solely through 1-bit switching. An aperture-coupled patch-based meta-atom topology with well-separated and linearized phase responses is employed to enable 1-bit switching using a short/open connection. As a proof of concept, 30×30 RP-EMS prototypes with a 3.14×3.14 cm2 aperture and λ/2 periodicity at 140 GHz are designed and fabricated, demonstrating reflection at 15∘, 30∘, and 45∘ under normal incidence. The prototypes exhibited robust beam steering with QLL consistently below -10 dB and SLL up to -10 dB, confirming the effectiveness of the proposed MASB layout. In addition, the structures achieve 3-dB gain bandwidth exceeding 11% and high reflection efficiencies over 15%, referenced to a conductor surface of the same size. These results validate the potential of the proposed architecture for implementing multi-functional 1-bit RP-EMS with controlled sidelobes and no grating lobe near 140 GHz.

  • Open Access

    Path Loss Modeling and Communication Performance Verification Of Transmissive RIS in Simulated Outdoor-to-Indoor Channels

    by Sangmin Lee, Sangjo Choi

    한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)

  • Reconfigurable Planar Huygens' Metasurface for Wide Beamforming

    by Sangmin Lee, Sangjo Choi

    Huygens' metasurfaces (HMSs), which independently control electric and magnetic dipole responses, have been implemented in planar platforms. However, dynamically controlling both dipole responses to achieve reconfigurability at the sub‐wavelength scale remains challenging with conventional planar HMSs. In this work, these challenges are addressed by introducing the first planar, reconfigurable HMS design that integrates varactors and embedded bias lines, allowing for precise and independent control of electric and magnetic surface impedances at the sub‐wavelength scale (λ0/9.4 × λ0/6.3 × λ0/22.7) at 5.5 GHz. A large‐aperture HMS (4.47λ0 × 4.47λ0), integrated with 3,528 varactors and fed by a 4 × 4 patch array at a focal‐length‐to‐diameter ratio of 1.6, demonstrates wide beamforming angles ranging from −70° to +70° with an aperture efficiency of 21.09%. This innovative design offers a promising solution for efficient and compact reconfigurable intelligent surfaces, paving the way for advanced wave control in next‐generation wireless communication and sensing applications


  • Pre-Phased 1-bit Reflective Passive Metasurface With Optimum Number of Pre-Phasing for Low QLL and SLL at 140 GHz

    by Taeyoung Kim, Sangmin Lee, Seongwoog Oh, Jinhyun Kim, Jungsuek Oh, Sangjo Choi

    Recent advancements introduced a pre-phased reflective metasurface (MS) using 1-bit control to suppress the quantization lobe (QL) inherent in a typical 1-bit MS under plane wave incidence, particularly in millimeter and sub-millimeter wave bands. However, the optimal method for pre-phasing using random phases has yet to be fully explored. This study investigates the optimal number of pre-phasing, which denotes the minimum number of discrete random phases for effective suppression of QLs and side lobes while ensuring low design complexity. The results indicate that employing four discrete phases, equally spaced at 45° intervals, is the optimal solution for both normal and oblique incidences. The random phases with a 45° separation are implemented into four pairs of unit cells with passive ON/OFF switching using multilayer PCBs at 140 GHz. Each unit cell consisted of a metallic patch coupled to a transmission (Tx) line through a slot, with embedded static ON/OFF switching in the Tx line to enable 1-bit reflection phase control. Finally, three MSs with 30 × 30 unit cells, each with fixed random pre-phases, are designed and fabricated to reflect normal incidence at reflection angles (θ r ) of 15°, 30°, and 45° at 140 GHz. The experiment results demonstrate peak reflected beams at 15°, 29°, and 45° with frequencies of 139.7 GHz, 139.1 GHz, and 135.9 GHz, respectively. In addition, significant reductions in QL to −20 dB were observed, along with reflection efficiency of 26%, and a 3 dB gain bandwidth exceeding 10%, on average, across all reflection angles in the 140 GHz band.


  • Open Access

    Reconfigurable Planar Huygens' Metasurface for a Wide-Beam Steering Transmitarray

    by Sangmin Lee, Sangjo Choi

    This paper presents a novel planar-type reconfigurable Huygens' metasurface (HMS), featuring subwavelength electric and magnetic dipoles with electronic tunability embedded in a thin, double-layered printed circuit board. Three varactors are integrated into both dipoles in a small HMS unit cell measuring λ0/9.4×λ0/6.3×λ0/22.7 at 5.5 GHz. This integration allows for independent control over the electric and magnetic surface impedances, facilitating dynamic tuning for transmission phases covering nearly 240 ° along with low insertion losses. Finally, a large-scale HMS with a 4.47λ0 × 4.47λ0 aperture integrated with 3528 varactors is fabricated, and its beamforming capability as a transmitarray fed by a 4×4 patch array is verified. The measurement results demonstrate an aperture efficiency of 21.09% with a beam-steering range from −70° to +70 ° at a focal-length-to-diameter ratio of 1.6.

  • Universal and Non-Iterative Design Method for In-Phase Radiation of Microstrip Traveling-Wave Series-Fed Antenna Arrays

    by Sangmin Lee, Sangjo Choi

    Microstrip traveling-wave series-fed antenna arrays (MTSAAs) have been popularly developed for radar systems in the millimeter-wave band. Because the antennas are connected and fed in series in MTSAA, in-phase radiation of the antenna elements with properly tapered amplitude for achieving a broadside beam with a low sidelobe level (SLL) is challenging. Although the reported series-fed patch and comb-line arrays accomplished the goal, design equations for the optimum distances between antenna elements in the series-fed array do not guarantee in-phase radiation due to the mutual coupling in array structures. Therefore, optimization of the distances in the array using full-wave simulations is inevitable. In this paper, we propose the first universal and non-iterative design equation that compensates for the phase offset generated in patch and comb-line MTSAAs and successfully found optimum distances for broadside beams with low SLLs without optimization. Finally, we fabricated both MTSAAs with 10 elements operating at 76.5 GHz and demonstrated almost 13 dB boresight gain and low SLLs near -18 dB without a beam tilt.