Multiphysics Simulation of Multi-layered Fibrous Electrodes for the Vanadium Redox Flow Battery
Open Access
- 2 September 2024
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 171 (9) , 090534
Abstract
Electrospinning can create customized flow-through electrodes for redox flow batteries with small fibers to enhance reactive surface area. A downside is higher pressure drop and parasitic pumping losses. Multilayered electrodes are a promising remedy, but it is not obvious what properties each layer should have to get the most benefit. In this work, a multiphysics simulation was used to explore the impact of varying the properties of each layer on the performance of a cell, including fiber size, fiber alignment, and porosity. The results showed that a 300% increase in limiting current can be obtained over commercial materials when the layer near the membrane has larger fibers with smaller fibers in each successive layer (1.8, 1.0 & 0.2 um, respectively). This arrangement had relatively lower overall efficiency once pumping power was taken into account. A compromise was obtained by placing a high porosity layer near the membrane with lower porosity in each successive layer (91%, 86%, and 81%, respectively). This case resulted in a 250% increase in limiting current, while expending only 0.1% of the output power on pumping.Keywords
Funding Information
- Japan Society for the Promotion of Science (Fellowships (22KJ2198))
- Natural Sciences and Engineering Research Council of Canada (CREATE-ME2)
This publication has 50 references indexed in Scilit:
- A comparative study of iron-vanadium and all-vanadium flow battery for large scale energy storageChemical Engineering Journal, 2022
- X‐ray Nano Computed Tomography of Electrospun Fibrous Mats as Flow Battery ElectrodesEnergy Technology, 2018
- Analysis of flow field design on vanadium redox flow battery performance: Development of 3D computational fluid dynamic model and experimental validationApplied Energy, 2018
- Recent Advancements in All‐Vanadium Redox Flow BatteriesAdvanced Materials Interfaces, 2015
- A vanadium redox flow battery model incorporating the effect of ion concentrations on ion mobilityApplied Energy, 2015
- Electrospun Carbon Nanofibers as Alternative Electrode Materials for Vanadium Redox Flow BatteriesChemElectroChem, 2015
- Recent Progress in Redox Flow Battery Research and DevelopmentAdvanced Functional Materials, 2012
- Redox flow batteries: a reviewJournal of Applied Electrochemistry, 2011
- The permeability of fibrous porous mediaThe Canadian Journal of Chemical Engineering, 1986
- Mass transfer at carbon fibre electrodesJournal of Applied Electrochemistry, 1986