Distance for fragmentation of a simulated molten-core material discharged into a sodium pool
- 10 December 2015
- journal article
- research article
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 53 (5) , 707-712
Abstract
A series of experiments has been carried out to obtain experimental knowledge on the distance for fragmentation of a molten core material discharged into the sodium plenum during postulated core disruptive accidents of sodium-cooled fast reactors. In the current experiments, 0.9 kg of molten aluminum (initial temperature: around 1473 K) was discharged into a sodium pool (diameter: 0.11 m, depth: 1 m, initial temperature: 673 K) through a nozzle (inner diameter: 20 mm). Visual observation of the fragmentation behavior was performed using an X-ray imaging system. The following experimental results were obtained. (1) Liquid column of molten aluminum was intensively fragmented almost simultaneously with a rapid expansion of sodium vapor in the vicinity of the column. (2) Due to the intensive fragmentation, penetration of the liquid column was limited to approximately 100 mm or so from the sodium level. (3) The molten aluminum was rapidly cooled after the intensive fragmentation. Based on these results, the distance for fragmentation of the liquid column was estimated to be 100 mm in the experiments. Through the current experiment, useful knowledge was obtained for the future development of an evaluation method of the distance for fragmentation of the molten core material.Keywords
This publication has 6 references indexed in Scilit:
- A scenario of core disruptive accident for Japan sodium-cooled fast reactor to achieve in-vessel retentionJournal of Nuclear Science and Technology, 2014
- Experimental study on simulated molten jet-coolant interactionsNuclear Engineering and Design, 1995
- Pouring of 100-kg-Scale Molten UO2 into SodiumNuclear Technology, 1992
- Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid dropInternational Journal of Multiphase Flow, 1987
- Boiling and fragmentation behaviour during fuel-sodium interactionsNuclear Engineering and Design, 1986
- On the Mechanism of Uranium Dioxide-Sodium Explosive InteractionsNuclear Science and Engineering, 1973