Experimental investigation into the effects of deep cold rolling on the surface quality and hardness of brass C38500
- 25 July 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 0965d5
Abstract
In the current study, the effect of deep cold rolling (DCR) as a mechanical surface treatment on the surface quality of C38500 brass alloy is investigated. To this end, the surface roughness and hardness of the raw material is measured firstly using the roughness and hardness tester. A simple tool is designed and fabricated for performing the treatments using surface pressure induced by a small ball. DCR process is accomplished by different kinds of balls to determine the effects of ball hardness on the surface roughness and hardness. Then, roughness and hardness tests are carried out for the treated specimens. Results show about 930% and 8.4% improvement for surface roughness and hardness regarding to best conditions, respectively. Also, subsurface hardness shows this treatment can shift the hardness curves to higher values. It is also obtained that different materials for ball and its surface quality as well as different rolling depths caused various results. The minimum surface scratches (roughness) of ball leads to high quality treated specimen. Higher ball hardness causes more deformation on the surface of specimen similar to higher rolling depth.Keywords
This publication has 25 references indexed in Scilit:
- Effects of the deep rolling process on the surface roughness and properties of an Al−3vol%SiC nanoparticle nanocomposite fabricated by mechanical milling and hot extrusionInternational Journal of Minerals, Metallurgy and Materials, 2017
- Surface quality improvement of EDMed Ti–6Al–4V alloy using plasma etching and TiN coatingThe International Journal of Advanced Manufacturing Technology, 2016
- Optimization of surface roughness and cutting force during AA7039/Al2O3 metal matrix composites milling using neural networks and Taguchi methodMeasurement, 2015
- Experimental parameter sensitivity analysis of residual stresses induced by deep rolling on 7075-T6 aluminium alloySurface and Coatings Technology, 2014
- Analytical Prediction of Roughness after Ball Burnishing of Thermally Coated SurfacesProcedia Engineering, 2014
- Powder Metallurgical Components: Improvement of Surface Integrity by Deep Rolling and Case HardeningProcedia CIRP, 2014
- Surface Defect Generation and Recovery in Cold Rolling of Stainless Steel StripsJournal of Tribology, 2010
- A Review of Fatigue Behavior in Nanocrystalline MetalsExperimental Mechanics, 2009
- Recent Developments in Mechanical Surface OptimizationMaterials Science Forum, 2000
- Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304Materials Science and Engineering: A, 1999