Over-Current Capability of Silicon Carbide and Silicon Devices for Short Power Pulses with Copper and Phase Change Materials below the Chip
Open Access
Abstract
An increasing share of fluctuating and intermittent renewable energy sources can cause over-currents (OCs) in the power system. The heat generated during OCs increases the junction temperature of semiconductor devices and could even lead to thermal runaway if thermal limits are reached. In order to keep the junction temperature within the thermal limit of the semiconductor, the power module structure with heat-absorbing material below the chip is investigated through COMSOL Multiphysics simulations. The upper limits of the junction temperature for Silicon (Si) and Silicon Carbide (SiC) are assumed to be 175 and 250 C, respectively. The heat-absorbing materials considered for analysis are a copper block and a copper block with phase change materials (PCMs). Two times, three times, and four times of OCs would be discussed for durations of a few hundred milliseconds and seconds. This article also discusses the thermal performance of a copper block and a copper block with PCMs. PCMs used for Si and SiC are LM108 and Lithium, respectively. It is concluded that the copper block just below the semiconductor chip would enable OC capability in Si and SiC devices and would be more convenient to manufacture as compared to the copper block with PCM.
Keywords
Funding Information
- Hitachi Energy Research and Swedish Energy Agency
This publication has 55 references indexed in Scilit:
- Experimental evaluation of metallic phase change materials for thermal transient mitigationInternational Journal of Heat and Mass Transfer, 2018
- Energy Efficient Heat Sink Design: Natural Versus Forced Convection CoolingIEEE Transactions on Power Electronics, 2016
- Investigation of the surge current capability of the body diode of SiC MOSFETs for HVDC applications2016
- Effect of junction temperature swing durations on a lifetime of a transfer molded IGBT module2016
- Development of a power dense and environmentally robust traction power inverter for the second-generatio chevrolet VOLT extended-range EV2015
- Survey of High-Temperature Reliability of Power Electronics Packaging ComponentsIEEE Transactions on Power Electronics, 2014
- Time scale matching of dynamically operated devices using composite thermal capacitorsMicroelectronics Journal, 2014
- Effects of Extreme Temperature Swings ( $-\hbox{55}\ ^{\circ}\hbox{C}$ to 250 $^{\circ}\hbox{C}$) on Silicon Nitride Active Metal Brazing SubstratesIEEE Transactions on Device and Materials Reliability, 2014
- Trends in automotive power semiconductor packagingMicroelectronics Reliability, 2013
- SKiN: Double side sintering technology for new packages2011