Synergistic effects of steel fiber and rubberized aggregates on concrete properties
Open Access
- 1 August 2024
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (8) , 085516
Abstract
The drive for more sustainable and environmentally friendly construction practices has resulted in revolutionary concrete production methods. One way is to include scrap rubber tires (contributing significantly to environmental pollution) into concrete mixtures to increase deformability. This study investigates the impact of surface-treated waste tire rubber (which partially replaces natural coarse aggregates with 5%, 10%, and 15% by weight) and industrial steel fiber (as reinforcement by including 0.5, 1, and 1.5% volume fractions) in concrete. Twelve concrete mixtures were prepared as test specimens. The replacement percentage was then determined using the compressive strength test results for additional surface treatment with three different alkaline solution (NaOH) concentrations (5%, 10%, and 15%) for 72 h. Thus, the hardened concrete properties were analyzed using compressive strength, flexural strength, and toughness; whereas the fresh qualities of equivalent concrete mixtures were evaluated using concrete slump. The findings revealed that, while partial replacement had a negative impact on the mechanical properties of the concrete, it was possible to produce rubberized concrete with better mechanical properties than conventional concrete when the partial replacement was less than 5%, treated with 10% alkaline solution, and reinforced with 1.5% steel fibers. The study’s findings illustrate the potential of these combinations for use in concrete pavement and slab applications.Keywords
This publication has 35 references indexed in Scilit:
- Evaluating the Properties of Concrete Pavements Containing Crumb Rubber and Recycled Steel Fibers Using Response Surface MethodologyInternational Journal of Pavement Research and Technology, 2021
- Evaluation of microcracks in the interfacial transition zone of recycled rubber concreteStructural Concrete, 2019
- Specimen size effect on compressive and flexural strength of high-strength fibre-reinforced concrete containing coarse aggregateComposites Part B: Engineering, 2018
- Abrasion and freezing–thawing resistance of pervious concretes containing waste rubbersConstruction and Building Materials, 2014
- A two-staged surface treatment to improve properties of rubber modified cement compositesConstruction and Building Materials, 2013
- Study of impact performance of rubber reinforced concreteConstruction and Building Materials, 2012
- Scrap-tyre-rubber replacement for aggregate and filler in concreteConstruction and Building Materials, 2009
- Experimental investigation on dynamic properties of rubberized concreteConstruction and Building Materials, 2008
- Positive synergy between steel-fibres and rubber aggregates: Effect on the resistance of cement-based mortars to shrinkage crackingCement and Concrete Research, 2006
- Influence of scrap rubber addition to Portland I concrete composites: Destructive and non-destructive testingComposite Structures, 2005