TETsagazeab Yimer Ejigu

Tsagazeab Yimer Ejigu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tsagazeab Yimer Ejigu has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synergistic effects of steel fiber and rubberized aggregates on concrete properties

    by Belay Bayu Tefera, Abrham Gebre Tarekegn, Tsagazeab Yimer Ejigu

    The drive for more sustainable and environmentally friendly construction practices has resulted in revolutionary concrete production methods. One way is to include scrap rubber tires (contributing significantly to environmental pollution) into concrete mixtures to increase deformability. This study investigates the impact of surface-treated waste tire rubber (which partially replaces natural coarse aggregates with 5%, 10%, and 15% by weight) and industrial steel fiber (as reinforcement by including 0.5, 1, and 1.5% volume fractions) in concrete. Twelve concrete mixtures were prepared as test specimens. The replacement percentage was then determined using the compressive strength test results for additional surface treatment with three different alkaline solution (NaOH) concentrations (5%, 10%, and 15%) for 72 h. Thus, the hardened concrete properties were analyzed using compressive strength, flexural strength, and toughness; whereas the fresh qualities of equivalent concrete mixtures were evaluated using concrete slump. The findings revealed that, while partial replacement had a negative impact on the mechanical properties of the concrete, it was possible to produce rubberized concrete with better mechanical properties than conventional concrete when the partial replacement was less than 5%, treated with 10% alkaline solution, and reinforced with 1.5% steel fibers. The study’s findings illustrate the potential of these combinations for use in concrete pavement and slab applications.


  • Open Access

    Effect of Fiber Treatments on the Mechanical Properties of Sisal Fiber-Reinforced Concrete Composites

    by Tsagazeab Yimer, Abrham Gebre

    The mechanical behavior of fiber-cement composites is significantly influenced by the interfacial bonding between the fiber and the cement matrix. However, natural fibers are less chemically compatible with the cement matrix. As a result, it is essential to modify the surface of natural fibers to achieve good fiber-matrix interfacial bonds. In the current study, sisal fibers intended for use as a reinforcement in concrete matrices were alkali treated with NaOH solutions (2%, 5%, and 10%) for 12 hrs, 24 hrs, and 48 hrs. Water absorption, tensile strength, and surface morphological changes in fibers were studied. The effect of fiber treatment on the concrete was also assessed by measuring its slump, compressive strength, flexural strength, and toughness. Alkali treatment was discovered to reduce the water absorption capacity of sisal fiber. On the contrary, fiber surface morphology and mechanical properties improved up to a point and then gradually declined. The addition of treated sisal fiber considerably increases concrete’s flexural strength and toughness. However, an insignificant change in compressive strength was observed.