Effect of an Axially Tilted Variable Stator Vane Platform on Penny Cavity and Main Flow
- 29 September 2021
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 144 (2)
Abstract
This paper presents the impact of an axially tilted variable stator vane (VSV) platform on penny cavity flow and passage flow, with the aid of both optical and pneumatic measurements in an annular cascade wind tunnel as well as steady computational fluid dynamics (CFD) analyses. Variable stator vanes in axial compressors require a clearance from the endwalls. This means that penny cavities around the vane platform are inevitable. Production and assembly deviations can result in a vane platform which is tilted about the circumferential axis. Penny cavity and main flow in geometries with and without platform tilting were compared in an annular cascade wind tunnel. Detailed particle image velocimetry (PIV) measurements were conducted inside the penny cavity and in the vane passage. Steady pressure and velocity data was obtained by two-dimensional multi-hole pressure probe traverses in the inflow and the outflow. Furthermore, pneumatic measurements were carried out using pressure taps inside the penny cavity. Additionally, oil flow visualization was conducted on the airfoil, hub, and penny cavity surfaces. Steady CFD simulations have been benchmarked against experimental data. The results show that tilting the vane platform reduces the penny cavity leakage mass flow. By decreasing penny cavity leakage, platform tilting also affects the passage flow where it leads to a reduced turbulence level and total pressure loss in the leakage flow region. In summary, the paper demonstrates the influence of penny platform tilting on cavity flow and passage flow and provides new insights into the mechanisms of penny cavity-associated losses.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie (03ET7091A)
This publication has 11 references indexed in Scilit:
- Secondary Flow in Variable Stator Vanes With Penny-Cavities2017
- Investigation of Penny Leakage Flows of Variable Guide Vanes in High Pressure Compressors2016
- A Comparative Study of Gradient Reconstruction Methods for Unstructured Meshes with Application to Turbomachinery Flows2014
- Penny Gap Effect on Performance and Secondary Flowfield in a Compressor CascadeJournal of Propulsion and Power, 2012
- The Effect of Two Different Endwall-Penny Concepts for Variable Stator Vanes in a Compressor Cascade2012
- The Effect of Four Part Gap Geometry Configurations for Variable Stator Vanes in a Compressor Cascade2012
- Effect of a Mismatch Between the Buttons of Variable Stator Vanes and the Flowpath in a Highly Loaded Transonic Compressor Stage1997
- Convergence to Steady State Solutions of the Euler Equations on Unstructured Grids with LimitersJournal of Computational Physics, 1995
- Korrektur des Kopfgeometrieeinflusses einer Fünfloch- Drucksonde auf die Meßergebnisse / Correction method for the head geometry influence of a five-hole pressure probe on the measurement resultsTM - Technisches Messen, 1990
- Reassessment of the scale-determining equation for advanced turbulence modelsAIAA Journal, 1988