JJJohannes Janssen

Johannes Janssen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Johannes Janssen has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Aerodynamic influence of rim seal purge flow injection on the main flow in a 1.5-stage axial turbine with nonaxisymmetric end wall contouring

    by Lukas Schäflein, Johannes Janssen, Henri Brandies, Peter Jeschke, Stephan Behre

    This paper presents an investigation of the aerodynamic influence of rim seal purge flow injection on the main flow in a 1.5-stage turbine with non-axisymmetric end walls and a bowed stator using experimental flow measurements and unsteady RANS simulations. The study focuses on the secondary vortex structures formed in the rotor passages of the 1.5-stage axial turbine rig. Through performance map measurements, it was found that the efficiency gain of the non-axisymmetric configuration is partially eliminated by the injection of purge flow. Numerical investigations, which are supported by detailed flow measurements with five-hole probes and hot-wire probes, revealed that the injection of purge air flow intensifies vortex structures near the hub, thereby generating additional losses. These resulting vortex structures are highly similar both in the axisymmetric baseline and the non-axisymmetric configuration and are the result of jet-like vortices emerging from the cavity. From these findings, it can be concluded that the non-axisymmetric contour and the bowed stator no longer provides any efficiency benefit near the hub. Only the near the casing, where the flow is not affected by the purge flow, the optimized configuration continues to improve the efficiency of the rig by homogenizing the stator outflow and thus reducing the secondary flow structures in the rotor passages.


  • Influence of Purge Flow Injection on the Performance of an Axial Turbine With Three-Dimensional Airfoils and Non-Axisymmetric Endwall Contouring

    by Lukas Schäflein, Johannes Janssen, Henri Brandies, Peter Jeschke, Stephan Behre

    In this paper, we present the evaluation of the aerodynamic robustness to rim seal purge flow of an optimized 1.5-stage axial turbine configuration with a bowed stator profile and endwall contouring. Performance maps obtained by experiments and numerical simulations show that the efficiency benefit gained by this optimized configuration is partially reduced, but not eliminated, by the injection of purge flow through the cavity downstream of the first stator. Measurements with five-hole probes and hot-wire probes, as well as unsteady RANS simulations, give detailed insights into the physical effects of the purge flow inside the rotor passage. There, when no purge flow is injected, the optimized configuration diminishes the formation of loss-inducing secondary flow structures near the hub and the casing. When purge flow is injected, however, new strong secondary flow structures are induced near the hub. These vortices generate additional losses and thereby partially negate the efficiency benefits gained by the optimization. From the data, we found that this influence of the purge flow is limited to the lower half of the channel height. The data also show that the optimized configuration is able to reduce the vorticity near the casing regardless of the purge flow injection, which in turn leads to an efficiency increase in this area. Together, these effects lead to a reduction of the previously gained efficiency benefit by the optimized configuration when it is subjected to purge flow injection. However, compared to a baseline configuration with cylindrical endwalls also subject to purge flow injection, the overall efficiency is still increased by 0.38%.


  • Effect of an Axially Tilted Variable Stator Vane Platform on Penny Cavity and Main Flow

    by Johannes Janssen, Daniel Pohl, Peter Jeschke, Alexander Halcoussis, Rainer Hain, Thomas Fuchs

    This paper presents the impact of an axially tilted variable stator vane (VSV) platform on penny cavity flow and passage flow, with the aid of both optical and pneumatic measurements in an annular cascade wind tunnel as well as steady computational fluid dynamics (CFD) analyses. Variable stator vanes in axial compressors require a clearance from the endwalls. This means that penny cavities around the vane platform are inevitable. Production and assembly deviations can result in a vane platform which is tilted about the circumferential axis. Penny cavity and main flow in geometries with and without platform tilting were compared in an annular cascade wind tunnel. Detailed particle image velocimetry (PIV) measurements were conducted inside the penny cavity and in the vane passage. Steady pressure and velocity data was obtained by two-dimensional multi-hole pressure probe traverses in the inflow and the outflow. Furthermore, pneumatic measurements were carried out using pressure taps inside the penny cavity. Additionally, oil flow visualization was conducted on the airfoil, hub, and penny cavity surfaces. Steady CFD simulations have been benchmarked against experimental data. The results show that tilting the vane platform reduces the penny cavity leakage mass flow. By decreasing penny cavity leakage, platform tilting also affects the passage flow where it leads to a reduced turbulence level and total pressure loss in the leakage flow region. In summary, the paper demonstrates the influence of penny platform tilting on cavity flow and passage flow and provides new insights into the mechanisms of penny cavity-associated losses.