Study of the Mechanical Properties of Near-Space Airship Envelope Material Based on an Optimization Method
Open Access
Abstract
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.Keywords
Funding Information
- National Natural Science Foundation of China (61733017, 51906141)
- Shanghai Science Foundation of China (18ZR1419000)
- Program of Shanghai Academic Research Leader (20XD1430400)
This publication has 25 references indexed in Scilit:
- Airship Research and Development in the Areas of Design, Structures, Dynamics and Energy SystemsInternational Journal of Aeronautical and Space Sciences, 2012
- A simple model describing the non-linear biaxial tensile behaviour of PVC-coated polyester fabrics for use in finite element analysisComposite Structures, 2009
- An anisotropic viscoelastic fibre–matrix model at finite strains: Continuum formulation and computational aspectsComputer Methods in Applied Mechanics and Engineering, 2007
- A New Conjugate Gradient Method with Guaranteed Descent and an Efficient Line SearchSIAM Journal on Optimization, 2005
- Direct stress–strain representation for coated woven fabricsComputers & Structures, 2004
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- Non-linear constitutive model for plain-weave compositesComposites Part B: Engineering, 1997
- An optimization algorithm based on the method of feasible directionsStructural and Multidisciplinary Optimization, 1995
- Constitutive modelling and computation of non-linear viscoelastic solids. Part I: Rheological models and numerical integration techniquesComputer Methods in Applied Mechanics and Engineering, 1991
- Optimization by Simulated AnnealingScience, 1983