Junjie Wu
Research Subjects
Junjie Wu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jiwei Tang
School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai, China
3 shared publications - Weicheng Xie
Aerospace System Engineering Shanghai, shanghai 201108, China
3 shared publications - Xiaoliang Wang
School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai, China
2 shared publications - Yonglin Chen
School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China
2 shared publications - Hanjie Jiang
School of Aerospace Engineering Engineering Campus Universiti Sains Malaysia Pulau Pinang Malaysia
1 shared publication - Shilong Bai
Chongqing Near Space Innovation R&D Center, Shanghai Jiao Tong University, Chongqing 401135, China
1 shared publication
Latest Publications
- Open Access
Experimental Study on the Influence of Temperature on the Mechanical Properties of Near-Space Airship Envelopes
A biaxial tension test considering temperature is crucial to predict the mechanical properties of airship envelopes. However, there is a lack of biaxial tensile test equipment for high- and low-temperature correlation. In this study, a temperature control device suitable for biaxial tension was designed based on the traditional device, and the biaxial tension test of the UN-5100 material in high- and low-temperature environments was realized. In addition, a series of tests were carried out to verify the effectiveness and rationality of the temperature control device. Then, a biaxial tensile test of UN-5100 specimens between −33 °C and 80 °C were carried out and the stress–strain relationship of the UN-5100 specimens under high- and low-temperature environments was obtained. Based on the test data, the elastic modulus and Poisson’s ratio of the UN-5100 specimens at different temperatures were calculated. Finally, the test results showed that the elastic modulus and Poisson’s ratio of the airship envelope were larger at low temperatures, indicating that the capsule is relatively safe at such temperatures. The relationships between the temperature and the mechanical properties of the airship were also summarized.
Open AccessExperimental Study on the Influence of Temperature on the Mechanical Properties of Near-Space Airship Envelopes
A biaxial tension test considering temperature is crucial to predict the mechanical properties of airship envelopes. However, there is a lack of biaxial tensile test equipment for high- and low-temperature correlation. In this study, a temperature control device suitable for biaxial tension was designed based on the traditional device, and the biaxial tension test of the UN-5100 material in high- and low-temperature environments was realized. In addition, a series of tests were carried out to verify the effectiveness and rationality of the temperature control device. Then, a biaxial tensile test of UN-5100 specimens between −33 °C and 80 °C were carried out and the stress–strain relationship of the UN-5100 specimens under high- and low-temperature environments was obtained. Based on the test data, the elastic modulus and Poisson’s ratio of the UN-5100 specimens at different temperatures were calculated. Finally, the test results showed that the elastic modulus and Poisson’s ratio of the airship envelope were larger at low temperatures, indicating that the capsule is relatively safe at such temperatures. The relationships between the temperature and the mechanical properties of the airship were also summarized.
- Open Access
Analysis of Influence of Stratospheric Airship’s Key Parameter Perturbation on Motion Mode
The stratospheric airship is taken as the research object, and the motion mode analysis of the stratospheric airship is carried out. The influence of key parameters such as the center of mass, the center of buoyance, and the aerodynamic stability moment on the motion mode of stratospheric airship are analyzed and summarized in detail. According to the simulation and analysis results, unlike high-speed and high-dynamic aircrafts such as airplanes, the motion modes of the stratospheric airship are hardly affected by the perturbation of aerodynamic stability moment; the perturbations of the vertical center of mass and the vertical center of buoyancy have a great influence on the pitch pendulum motion modes, and their parameter perturbations affect the frequency of the pitch pendulum motion and also the stability of the pitch pendulum motion; the axial mass center location perturbation not only changes the damping of pitch pendulum motion but also affects the frequency of the yaw motion attitude motion mode to a certain extent.
Open AccessAnalysis of Influence of Stratospheric Airship’s Key Parameter Perturbation on Motion Mode
The stratospheric airship is taken as the research object, and the motion mode analysis of the stratospheric airship is carried out. The influence of key parameters such as the center of mass, the center of buoyance, and the aerodynamic stability moment on the motion mode of stratospheric airship are analyzed and summarized in detail. According to the simulation and analysis results, unlike high-speed and high-dynamic aircrafts such as airplanes, the motion modes of the stratospheric airship are hardly affected by the perturbation of aerodynamic stability moment; the perturbations of the vertical center of mass and the vertical center of buoyancy have a great influence on the pitch pendulum motion modes, and their parameter perturbations affect the frequency of the pitch pendulum motion and also the stability of the pitch pendulum motion; the axial mass center location perturbation not only changes the damping of pitch pendulum motion but also affects the frequency of the yaw motion attitude motion mode to a certain extent.
- Open Access
Study of the Mechanical Properties of Near-Space Airship Envelope Material Based on an Optimization Method
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.
Open AccessStudy of the Mechanical Properties of Near-Space Airship Envelope Material Based on an Optimization Method
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.