Xiaoliang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaoliang Wang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Jiwei Tang
School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai, China
4 shared publications - Weicheng Xie
Aerospace System Engineering Shanghai, shanghai 201108, China
4 shared publications Dengping Duan
School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai, China
2 shared publications- Junjie Wu
Aerospace System Engineering Shanghai, shanghai 201108, China
2 shared publications - Yonglin Chen
School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China
2 shared publications - Bin Sun
Shanxi Province Key Laboratory of Ophthalmology, Shanxi Eye Hospital, Taiyuan, China
1 shared publication
Latest Publications
- 6 November 2026
- Published by Springer Nature in Aerospace Systems
- p. 1-22
Cyclocopter dynamics modeling and adaptive PID control using deep deterministic policy gradient
- 6 November 2026
- Published by Springer Nature in Aerospace Systems
- p. 1-22
Cyclocopter dynamics modeling and adaptive PID control using deep deterministic policy gradient
- Open Access
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3303 (1)
Research on numerical method for aerodynamic characteristics of an airship based on overset mesh
An overset grid methodology is developed to address the meshing challenges arising from the disparate scales of an airship’s large axisymmetric hull and its thin, low-aspect-ratio fins. The computational domain is decomposed into a background grid, a hull near-field grid, four fin grids, and a node-matched collar grid at the hull-fin junction. Each component is meshed independently according to its own geometric features, while the collar grid eliminates interpolation errors at the critical junction. Under the same mesh-size specifications and flow conditions, the aerodynamic force coefficients from the overset scheme differ from those of a non-overset whole-configuration grid by 1.8%, and the orphan cells caused by hole-cutting have a negligible effect on the integrated loads. Comparisons with published LOTTE wind-tunnel data show discrepancies of approximately 6% in lift, 5–6% in drag, and 5–7% in pitching moment, which lie within the expected accuracy range of comparable CFD studies. The validated scheme is further applied to examine the influences of hull length and fin size. The results reveal that hull elongation reduces both lift and drag but significantly amplifies the nose-up pitching moment, intensifying longitudinal static instability. Fin enlargement, by contrast, has a mild impact on lift and drag, but yet effectively suppresses the nose-up moment, yielding a reduction of 26% at α = 10° for the studied configurations. The modular architecture of the approach allows each component mesh to be independently validated, stored in a database, and reused across different geometries, thereby substantially reducing the manual effort required for mesh generation in batch parametric studies.
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3303 (1)
Open AccessResearch on numerical method for aerodynamic characteristics of an airship based on overset mesh
An overset grid methodology is developed to address the meshing challenges arising from the disparate scales of an airship’s large axisymmetric hull and its thin, low-aspect-ratio fins. The computational domain is decomposed into a background grid, a hull near-field grid, four fin grids, and a node-matched collar grid at the hull-fin junction. Each component is meshed independently according to its own geometric features, while the collar grid eliminates interpolation errors at the critical junction. Under the same mesh-size specifications and flow conditions, the aerodynamic force coefficients from the overset scheme differ from those of a non-overset whole-configuration grid by 1.8%, and the orphan cells caused by hole-cutting have a negligible effect on the integrated loads. Comparisons with published LOTTE wind-tunnel data show discrepancies of approximately 6% in lift, 5–6% in drag, and 5–7% in pitching moment, which lie within the expected accuracy range of comparable CFD studies. The validated scheme is further applied to examine the influences of hull length and fin size. The results reveal that hull elongation reduces both lift and drag but significantly amplifies the nose-up pitching moment, intensifying longitudinal static instability. Fin enlargement, by contrast, has a mild impact on lift and drag, but yet effectively suppresses the nose-up moment, yielding a reduction of 26% at α = 10° for the studied configurations. The modular architecture of the approach allows each component mesh to be independently validated, stored in a database, and reused across different geometries, thereby substantially reducing the manual effort required for mesh generation in batch parametric studies.
- 4 February 2026
- Published by Springer Nature in Aerospace Systems
- Vol. 9 (1) , 199-211
Research on a surrogate model and sensitivity analysis for aircraft icing under intermittent maximum icing conditions based on random forest
- 4 February 2026
- Published by Springer Nature in Aerospace Systems
- Vol. 9 (1) , 199-211
Research on a surrogate model and sensitivity analysis for aircraft icing under intermittent maximum icing conditions based on random forest
- 9 March 2025
- Published by Springer Nature
- p. 188-200
Path Following Control Method for Airships Based on Longitudinal Deviation Compensation
- 9 March 2025
- Published by Springer Nature
- p. 188-200
Path Following Control Method for Airships Based on Longitudinal Deviation Compensation
- 14 June 2023
- Published by Springer Nature in Aerospace Systems
- Vol. 6 (3) , 393-406
A new coupling model of dynamics and thermodynamics to predict trajectory of stratospheric airship during ascent
- 14 June 2023
- Published by Springer Nature in Aerospace Systems
- Vol. 6 (3) , 393-406
A new coupling model of dynamics and thermodynamics to predict trajectory of stratospheric airship during ascent
- Open Access
Experimental Study on the Influence of Temperature on the Mechanical Properties of Near-Space Airship Envelopes
A biaxial tension test considering temperature is crucial to predict the mechanical properties of airship envelopes. However, there is a lack of biaxial tensile test equipment for high- and low-temperature correlation. In this study, a temperature control device suitable for biaxial tension was designed based on the traditional device, and the biaxial tension test of the UN-5100 material in high- and low-temperature environments was realized. In addition, a series of tests were carried out to verify the effectiveness and rationality of the temperature control device. Then, a biaxial tensile test of UN-5100 specimens between −33 °C and 80 °C were carried out and the stress–strain relationship of the UN-5100 specimens under high- and low-temperature environments was obtained. Based on the test data, the elastic modulus and Poisson’s ratio of the UN-5100 specimens at different temperatures were calculated. Finally, the test results showed that the elastic modulus and Poisson’s ratio of the airship envelope were larger at low temperatures, indicating that the capsule is relatively safe at such temperatures. The relationships between the temperature and the mechanical properties of the airship were also summarized.
Open AccessExperimental Study on the Influence of Temperature on the Mechanical Properties of Near-Space Airship Envelopes
A biaxial tension test considering temperature is crucial to predict the mechanical properties of airship envelopes. However, there is a lack of biaxial tensile test equipment for high- and low-temperature correlation. In this study, a temperature control device suitable for biaxial tension was designed based on the traditional device, and the biaxial tension test of the UN-5100 material in high- and low-temperature environments was realized. In addition, a series of tests were carried out to verify the effectiveness and rationality of the temperature control device. Then, a biaxial tensile test of UN-5100 specimens between −33 °C and 80 °C were carried out and the stress–strain relationship of the UN-5100 specimens under high- and low-temperature environments was obtained. Based on the test data, the elastic modulus and Poisson’s ratio of the UN-5100 specimens at different temperatures were calculated. Finally, the test results showed that the elastic modulus and Poisson’s ratio of the airship envelope were larger at low temperatures, indicating that the capsule is relatively safe at such temperatures. The relationships between the temperature and the mechanical properties of the airship were also summarized.
- Open Access
Study of the Mechanical Properties of Near-Space Airship Envelope Material Based on an Optimization Method
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.
Open AccessStudy of the Mechanical Properties of Near-Space Airship Envelope Material Based on an Optimization Method
An optimal calculation method for the mechanical properties of near-space capsule materials was proposed. First, biaxial tensile tests under low tensile ratios were carried out on the envelope materials of a near-space airship. The experimental results showed that the values of the elastic modulus and Poisson’s ratio, which are significantly affected by the warp and weft stresses, were not constant. Second, the elastic modulus and Poisson’s ratio of the near-space airship were obtained by using the traditional calculation method, and the limitations of this method were discussed. Third, an optimal calculation model for the elastic modulus and Poisson’s ratio of airship envelopes was proposed. The strain calculated by the proposed optimization model could be effectively correlated to the strain measured by the experiment. Then, through the user-defined subroutine of the finite element method and the elastic modulus and Poisson’s ratio calculated by the proposed optimization, the strain of the finite element simulation was obtained. The average error between the simulation results and the experimental values was approximately 8.21% (warp) and 8.41% (weft). The proposed method can consider the nonlinear changes of the elastic modulus and Poisson’s ratio of membrane material under different stress ratios and predict the force and deformation of the airship’s capsule more accurately, which is adaptable to engineering applications.
- 19 August 2022
- Published by Springer Nature in Journal of Shanghai Jiaotong University (Science)
- Vol. 27 (6) , 768-779
Construction on Aerodynamic Surrogate Model of Stratospheric Airship
- 19 August 2022
- Published by Springer Nature in Journal of Shanghai Jiaotong University (Science)
- Vol. 27 (6) , 768-779
Construction on Aerodynamic Surrogate Model of Stratospheric Airship
- Open Access
Simulation and Analysis of Fluid–Solid–Thermal Unidirectional Coupling of Near-Space Airship
Based on the biaxial experiment data of the membrane material under hot and cold conditions, the mechanical properties calculation model of envelope material was established with consideration of the effects of varying stress ratios, stress magnitudes and temperatures on the mechanical properties of near-space airship material. Using the heat source model, Computational Fluid Dynamics (CFD) simulation, User-Defined Function (UDF), structural finite element analysis software and the user subroutine of an airship to define the behaviour of fabric material, the fluid–structure–thermal coupling model of airship envelopes was established. In addition, a near-space airship was selected as the research subject to calculate the diurnal temperature differences during the summer solstice and analyse the diurnal temperature distribution of the envelope. Under controlled environmental conditions, the deformation law of the near-space airship under the influence of fluid–structure–thermal coupling was calculated and summarised. The present fluid–solid–thermal coupling model takes into account the anisotropy of materials, temperature, stress magnitude, stress ratio and other influencing factors, which can more accurately reflect and predict the stress–strain distribution and the deformation law of near-space airships.
Open AccessSimulation and Analysis of Fluid–Solid–Thermal Unidirectional Coupling of Near-Space Airship
Based on the biaxial experiment data of the membrane material under hot and cold conditions, the mechanical properties calculation model of envelope material was established with consideration of the effects of varying stress ratios, stress magnitudes and temperatures on the mechanical properties of near-space airship material. Using the heat source model, Computational Fluid Dynamics (CFD) simulation, User-Defined Function (UDF), structural finite element analysis software and the user subroutine of an airship to define the behaviour of fabric material, the fluid–structure–thermal coupling model of airship envelopes was established. In addition, a near-space airship was selected as the research subject to calculate the diurnal temperature differences during the summer solstice and analyse the diurnal temperature distribution of the envelope. Under controlled environmental conditions, the deformation law of the near-space airship under the influence of fluid–structure–thermal coupling was calculated and summarised. The present fluid–solid–thermal coupling model takes into account the anisotropy of materials, temperature, stress magnitude, stress ratio and other influencing factors, which can more accurately reflect and predict the stress–strain distribution and the deformation law of near-space airships.
- 23 November 2021
- Published by Springer Nature in Aerospace Systems
- Vol. 5 (1) , 85-105
Three-dimensional path-following adaptive control of stratospheric airship based on improved chemical reaction optimization algorithm
- 23 November 2021
- Published by Springer Nature in Aerospace Systems
- Vol. 5 (1) , 85-105
Three-dimensional path-following adaptive control of stratospheric airship based on improved chemical reaction optimization algorithm