Pulsed operation of a DC welding power source in resistance projection welding
Open Access
- 28 December 2025
- journal article
- research article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 26 (1) , 31
Abstract
The effect of pulse welding current (DC, 1 kHz) on the progression of projection welding process of nuts was analysed. The study involved a comparative analysis using identical average value for pulsed DC current with continuous direct current (DCc), which is commonly used in conventional mode. The analysis was conducted for nuts featuring four trapezoidal projections, made of grade 10B21 steel (AISI1017-SORPAS library), with a projection height of 1.2 mm and an initial contact area between the projection and the sheet metal of 7.8 mm 2 . The second welded component was a 3.0 mm thick DC04 sheet metal. Numerical analyses in both cases were conducted using the SORPAS ™ software. The characteristic parameters evaluated were weld strength, volume of melted material (in both the sheet and the projection), area of molten material in the contact region, welding energy, and average welding current. The results of the numerical calculations were verified experimentally. The study demonstrated the beneficial effect of pulsed welding current (DC, 1 kHz) on weld quality, particularly in terms of improved strength. It is possible to both reduce welding time and increase weld strength for pulsed DC welding. With comparable weld strength, welding time can be reduced by over 30%. In turn, for the same welding time (and thus the same energy), the weld strength can be increased by 35%.Keywords
This publication has 19 references indexed in Scilit:
- Effect of pulsed current-assisted CMT welding parameters on friction and wear properties and electrochemical corrosion performance of heterogeneous structure compositesJournal of Materials Research and Technology, 2025
- Comparative analysis of a projection welding process with AC and DC current source for susceptibility studyThe International Journal of Advanced Manufacturing Technology, 2025
- Unravelling the influence of CMT characteristic parameters on process stability and joint properties in dissimilar aluminium-steel weld-brazingJournal of Manufacturing Processes, 2025
- Comparative analysis of MIG brazing modes: process stability, bead morphology, microstructure, and mechanical propertiesThe International Journal of Advanced Manufacturing Technology, 2024
- Comparative analysis between multi-pulse and constant welding current for resistance spot welding processJournal of Materials Science, 2023
- A review on Cold Metal Transfer (CMT) technology of weldingMaterials Today: Proceedings, 2022
- Cold metal transfer (CMT) technology - An overviewDefence Technology, 2018
- Investigation of droplet transfer behaviours in cold metal transfer (CMT) process on welding Ti-6Al-4V alloyThe International Journal of Advanced Manufacturing Technology, 2015
- Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloyThe International Journal of Advanced Manufacturing Technology, 2014
- Plasma arc welding: Process, sensing, control and modelingJournal of Manufacturing Processes, 2014